Text only | Text with Images

Dangerous Prototypes

Dirty Services => DirtyPCBs support => Topic started by: cvgaviao on November 23, 2016, 04:08:08 pm

Title: Design Rules using KiCad for DirtyPCB
Post by: cvgaviao on November 23, 2016, 04:08:08 pm
Hello,

I will start a new board project soon and I will use Kicad to design it.

I would like to ask for some tips about setting the design rules (traces, holes, vias size, etc), layers to be used and gerber generation in order to produce the boards at DirtyPCB. Is there any documentation in the internet ?

many thanks for any tip.

regards
Title: Re: Design Rules using KiCad for DirtyPCB
Post by: luftek on November 23, 2016, 09:28:25 pm
Design rules under Specification on http://dangerousprototypes.com/store/pcbs (http://dangerousprototypes.com/store/pcbs)
Gerbers according first 2 photos https://github.com/luftek/LimeSDR-USB/t ... ges/design (https://github.com/luftek/LimeSDR-USB/tree/master/hardware/plug/1v2/Enclosure/0v6_76x35/images/design)
Text only | Text with Images

( ! ) Fatal error: Uncaught exception 'Elk_Exception' with message 'Please try again. If you come back to this error screen, report the error to an administrator.' in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
( ! ) Elk_Exception: Please try again. If you come back to this error screen, report the error to an administrator. in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
Call Stack
#TimeMemoryFunctionLocation
10.00862038328session_write_close ( )...(null):0
20.00892169904ElkArte\sources\subs\SessionHandler\DatabaseHandler->write( )...(null):0
30.00892170680Database_MySQL->query( ).../DatabaseHandler.php:119
40.05222309400Database_MySQL->error( ).../Db-mysql.class.php:273