Dangerous Prototypes

Dangerous Prototypes => Bus Pirate Support => Topic started by: ian on August 27, 2009, 12:14:08 pm

Title: EEPROM dump and program
Post by: ian on August 27, 2009, 12:14:08 pm
This is probably the first new feature I'll add to v2.2.

First I'll do the read (dump) macro. I think the macro will need:
* Total length in bytes.

The write will also need to know:
* Page length in bytes. Default for microchip and atmel I2C seems to be 32bytes. 12 bytes for Microchip 25AA SPI EEPROMs.
* Flow control (hardware flow control is implemented as of v2go).