I recieved my new Open Logic Sniffer ardware
I dowloaded "ols-0308.zip" and installed it
On the first test everithing was OK
I stopped the PC (running under Windows 7-64 bits, SP1)
I restarted the PC
Now, everytime I start "Jawis-OLS-client.exe", I can't change the sampling rate
In the menu : "Catpure "/ "Begin capture", in the tab "Acquisition", the comboboxes :
- Number scheme
- Sampling clock
- Sampling rate
- Recording size
are empty, i can't select anything
in the tab "Connection", the combobox
- Devicet type
is empty, i can't select anything
Communication with the ardware works (on COM6), and values captured are displayed
On board leds are :
PWR : On
ACT : Off
TRIG : Off
ARM : On
For more information:
OLS-read.bat and OLS-version.bat says me : "Device is not found"
The utility USBDeview.exe finds the hardware "Logic sniffer-CDC232", "Communications Port", connected on COM6 with VID 0x04d8 and PID 0xFC92
This utility also finds un unconnected device "Port_#0001.Hub_#0005", "Périphérique d’entrée USB" with VID 0x04d8 and PID 0xFC90
Someone as any idea on this troubles ?
Mind that the ols-0308 package contains a very old firmware for the OBLS (and OLS client). This might explain your problems. You might want to consider upgrading your firmware to the latest "unofficial" one: the DemonCore (http://http://dangerousprototypes.com/forum/viewtopic.php?f=23&t=1711) version.
HtH,