Title: Logic Pirate ICSP jig
Post by: TomKeddie on May 25, 2014, 01:00:44 pm
Post by: TomKeddie on May 25, 2014, 01:00:44 pm
This week at VHS (http://http://vancouver.vanhack.ca) we're building Logic Pirates in our SMD workshops. The LP is an awesome little open hardware logic analyser design from DP.
The ICSP header is a tiny 0.05" pitch, I struggled with this a little until I came up with this top and bottom 0.1" jig (obvious in hindsight).
The LP is currently OOS at Seeed (http://http://www.seeedstudio.com/depot/Logic-Pirate-p-1750.html), I'm selling the extra PCBs on Tindie (http://https://www.tindie.com/products/TomKeddie/logic-pirate-dangerous-prototypes-pcb-only).
The doco page on the LP is at http://http://dangerousprototypes.com/docs/Logic_Pirate. As above you need a pickit to program the initial bootloader and firmware image. The hex file can be found at http://http://dangerous-prototypes-open-hardware.googlecode.com/svn/trunk/Logic_Pirate/AN1388_Source_Code_V2012_10_05/PIC32_Bootloaders/Firmware/logic_pirate_combined_2013-06-25.hex.
The Mouser project is at http://http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=0a63fc5366
The ICSP header is a tiny 0.05" pitch, I struggled with this a little until I came up with this top and bottom 0.1" jig (obvious in hindsight).
The LP is currently OOS at Seeed (http://http://www.seeedstudio.com/depot/Logic-Pirate-p-1750.html), I'm selling the extra PCBs on Tindie (http://https://www.tindie.com/products/TomKeddie/logic-pirate-dangerous-prototypes-pcb-only).
The doco page on the LP is at http://http://dangerousprototypes.com/docs/Logic_Pirate. As above you need a pickit to program the initial bootloader and firmware image. The hex file can be found at http://http://dangerous-prototypes-open-hardware.googlecode.com/svn/trunk/Logic_Pirate/AN1388_Source_Code_V2012_10_05/PIC32_Bootloaders/Firmware/logic_pirate_combined_2013-06-25.hex.
The Mouser project is at http://http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=0a63fc5366