Title: Home needed for tools: preheater, studio, etc
Post by: ian on September 10, 2013, 11:22:57 am
Post by: ian on September 10, 2013, 11:22:57 am
This is moving week - DP is packing up and moving the office to Shenzhen, China. There's a bunch of stuff that doesn't make sense to ship, and other stuff that I'd prefer to buy new in China instead of shipping it.
You must be able to pick this stuff up in Amsterdam, The Netherlands, but the end of the weekend. I can't ship things, I'm sorry. Anything left over will go to the local hackerspace.
Up for grabs, free stuff:
D-GOLD 853 PCB preheater (220volts)
Cheapie soldering iron station
K9A2 CF motherboard, AMD 64bit processor (not sure specs, 2 cores maybe?), 4GB DDR ram, ASUS passive cooled video card, cooler (basically the guts of my first video editing rig)
FERM air compressor, 3litre, 220volts
HAD photo studio light box LED and cold cahtode
Stuff I'd part with for a few bucks so I can replace it in china, else I just ship it all:
Qinsi QS-5100 reflow oven (220volts)
D-GOLD 946A+ hot plate (220volts)
TM220A pick and place (220volts)
Aoyue 852 hot air rework station (220volts)
Aoyue 968 3-in-1 rework station (hot air doesn't work...) (220volts)
Samsung SCX-3400 laser printer (220volts)
PE-986A solder paste dispenser (220volts)
Will probably add more stuff in the coming days.
Best would be to email me at ian @ this site, or the contact form.
You must be able to pick this stuff up in Amsterdam, The Netherlands, but the end of the weekend. I can't ship things, I'm sorry. Anything left over will go to the local hackerspace.
Up for grabs, free stuff:
D-GOLD 853 PCB preheater (220volts)
Cheapie soldering iron station
K9A2 CF motherboard, AMD 64bit processor (not sure specs, 2 cores maybe?), 4GB DDR ram, ASUS passive cooled video card, cooler (basically the guts of my first video editing rig)
FERM air compressor, 3litre, 220volts
HAD photo studio light box LED and cold cahtode
Stuff I'd part with for a few bucks so I can replace it in china, else I just ship it all:
Qinsi QS-5100 reflow oven (220volts)
D-GOLD 946A+ hot plate (220volts)
TM220A pick and place (220volts)
Aoyue 852 hot air rework station (220volts)
Aoyue 968 3-in-1 rework station (hot air doesn't work...) (220volts)
Samsung SCX-3400 laser printer (220volts)
PE-986A solder paste dispenser (220volts)
Will probably add more stuff in the coming days.
Best would be to email me at ian @ this site, or the contact form.
Title: Home needed for tools: preheater, studio, etc
Post by: TomKeddie on September 14, 2013, 01:03:46 am
Post by: TomKeddie on September 14, 2013, 01:03:46 am
Ian,
All the best with the move, wish I could buy some of this stuff but I'm closer to China than Amsterdam.
Cheers,
Tom
Sent from my iPad using Tapatalk HD
All the best with the move, wish I could buy some of this stuff but I'm closer to China than Amsterdam.
Cheers,
Tom
Sent from my iPad using Tapatalk HD
Title: Re: Home needed for tools: preheater, studio, etc
Post by: TonyD on September 17, 2013, 02:28:01 pm
Post by: TonyD on September 17, 2013, 02:28:01 pm
Ian
Good luck with DP's move to China.
Good luck with DP's move to China.
Title: Re: Home needed for tools: preheater, studio, etc
Post by: Sleepwalker3 on September 18, 2013, 10:24:22 am
Post by: Sleepwalker3 on September 18, 2013, 10:24:22 am
I would soooooooooo love that preheater (not to mention the TMS220), that's a real nice looking unit. But I'm on the other side of this Rock :(
Ah well.
Best of luck with the move Ian!
Ah well.
Best of luck with the move Ian!
Title: Re: Home needed for tools: preheater, studio, etc
Post by: gijs on April 17, 2014, 04:40:04 pm
Post by: gijs on April 17, 2014, 04:40:04 pm
is the TM220A still for sale? i am in the netherlands.
Title: Re: Home needed for tools: preheater, studio, etc
Post by: ian on April 20, 2014, 06:10:02 am
Post by: ian on April 20, 2014, 06:10:02 am
Nope, I sent it to China by sea :) sitting in a closet in hong kong, waiting to cross the border with me.
Title: Re: Home needed for tools: preheater, studio, etc
Post by: Sleepwalker3 on July 30, 2014, 03:12:03 am
Post by: Sleepwalker3 on July 30, 2014, 03:12:03 am
There is threads specifically on the P&P if you look around the forum
Title: Re: Home needed for tools: preheater, studio, etc
Post by: Sleepwalker3 on July 30, 2014, 03:21:11 am
Post by: Sleepwalker3 on July 30, 2014, 03:21:11 am
Like here http://http://dangerousprototypes.com/forum/viewtopic.php?f=68&t=4903
and the video here http://http://dangerousprototypes.com/2013/02/21/workshop-video-56-tm220a-table-top-pick-and-place-overview/
and the video here http://http://dangerousprototypes.com/2013/02/21/workshop-video-56-tm220a-table-top-pick-and-place-overview/
Title: Re: Home needed for tools: preheater, studio, etc
Post by: ian on July 30, 2014, 06:17:42 am
Post by: ian on July 30, 2014, 06:17:42 am
He's a spammer. Had my eye on him for a few days. Now the link appears. Buh-bye :)
Title: Re: Home needed for tools: preheater, studio, etc
Post by: Sleepwalker3 on July 30, 2014, 03:34:33 pm
Post by: Sleepwalker3 on July 30, 2014, 03:34:33 pm
D'OH! How did I miss that one? I thought it was odd posting an old thread, but figured he was new. That should have alerted me but I didn't check his other posts or I would have booted him myself.