Hi all,
Recently upgraded my laptop to HP Probook 6560b (Win7 x64)
Now my buspirate / xsvf player doesnt work :( It plays the first 4096 bytes, reports success and error free but obviously it's not fully programmed the CPLD logic board.
Is there a known issue regarding x64, as it still works on my old x86 install on my old laptop. I don't have a log to hand, but will reply/edit later with one once I hook it up. Obviously the BP is detected fine/on said comport for it to play the first part, but don't know where to start with it for diagnosing issues.
Any input greatly appreciated.
Regards
**EDIT**
Here is the log,
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersBluffer>cd Downloads
C:UsersBlufferDownloads>cd BPv3.XSVFplayer.v1.1
C:UsersBlufferDownloadsBPv3.XSVFplayer.v1.1>BPXSVFplayer.exe -p com4 -f c:rev2e.xsvf
-----------------------------------------------------------------------------
BusPirate XSVF Player V.01
http://www.dangerousprototypes.com (http://www.dangerousprototypes.com)
-----------------------------------------------------------------------------
File is 22846 bytes, read 22846 bytes Opening Bus Pirate on com4 at 115200bps, u
sing XSVF file c:rev2e.xsvf
Entering XSVF Player Mode
Waiting for first data request...ok
Sending 4096 Bytes (1000)...ok
End of operation reply 00
Success!
Thank you for Playing! :-)
:(
Thanks for the report and update. I'm sorry, I have not seen any problems under Windows7 x64, and have not been able to reproduce any errors with our 2 CPLD boards. Are you using one of our boards? If it's another, could you please let me know the type to see if I have something to test against.
Are the xsvf files used on both systems the exact same file compiled on the same system?
I added this issue to the tracker for further investigation, thanks for your report:
http://dangerousprototypes.com/track/view.php?id=54 (http://dangerousprototypes.com/track/view.php?id=54)
Isn -
Just popped back on to see if there was a reply, and you got me thinking. I copied a lot of data over from my old laptop and none of the exe's run (apps that run from the exe itself) and a lot of files arent supported in their respective apps.
Your reply just made me realise, the xsvf's are likely corrupt too.
Will check back and report, many thanks for your reply.
c:BPv3.XSVFplayer.v1.1>BPXSVFplayer.exe -p com4 -f c:/redownload.xsvf
-----------------------------------------------------------------------------
BusPirate XSVF Player V.01
http://www.dangerousprototypes.com (http://www.dangerousprototypes.com)
-----------------------------------------------------------------------------
File is 22846 bytes, read 22846 bytes Opening Bus Pirate on com4 at 115200bps, u
sing XSVF file c:/redownload.xsvf
Entering XSVF Player Mode
Waiting for first data request...ok
Sending 4096 Bytes (1000)...ok
Sending 4096 Bytes (2000)...ok
Sending 4096 Bytes (3000)...ok
Sending 4096 Bytes (4000)...ok
Sending 4096 Bytes (5000)...ok
Sending 2366 Bytes (593E)...ok
End of operation reply 00
Success!
Thank you for Playing! :-)
Corrupt xsvf it would appear!
Thanks Ian, rectified.
Glad you got it. Thanks for your reply. I closed the bug on the tracker.