Dangerous Prototypes

Other projects => Past projects => Breakout boards => Topic started by: jfenwick on April 01, 2012, 12:48:26 am

Title: xQFP 0.40mm?
Post by: jfenwick on April 01, 2012, 12:48:26 am
Is it possible to use the xQFP 0.5mm board with a 0.4mm xQFP?
Title: Re: xQFP 0.40mm?
Post by: Bertho on April 01, 2012, 01:39:55 am
Not really, with 11 pins on a side (xQFP44), you are missing about 1mm wrong. With pin spacing at 0.4, you will be two pins off.