Title: PICqueno DIP free build - "Quartz tower"
Post by: fcobcn on November 11, 2011, 09:52:43 pm
Post by: fcobcn on November 11, 2011, 09:52:43 pm
This one came out very quick, since I had most of the parts from my previous build.
It's a very nice board, have great plans for it.
[attachment=2]
3 notes;
-Everything hand soldered.
-I'm using a REG113NA-3.3 from TI, it's a 400ma LDO, before finding it, I was using my bus pirate as a power supply to program the pic.
[attachment=1]
-Need to find a smaller quartz! The one on the previous picture was defective.
[attachment=0]
Thanks Ian!
It's a very nice board, have great plans for it.
[attachment=2]
3 notes;
-Everything hand soldered.
-I'm using a REG113NA-3.3 from TI, it's a 400ma LDO, before finding it, I was using my bus pirate as a power supply to program the pic.
[attachment=1]
-Need to find a smaller quartz! The one on the previous picture was defective.
[attachment=0]
Thanks Ian!
Title: Re: PICqueno DIP free build - "Quartz tower"
Post by: tayken on November 12, 2011, 04:21:07 am
Post by: tayken on November 12, 2011, 04:21:07 am
[quote author="fcobcn"]
-Need to find a smaller quartz! The one on the previous picture was defective.
[/quote]
That's a bad-ass quartz! :)
-Need to find a smaller quartz! The one on the previous picture was defective.
[/quote]
That's a bad-ass quartz! :)
Title: Re: PICqueno DIP free build - "Quartz tower"
Post by: hak8or on November 12, 2011, 05:07:11 am
Post by: hak8or on November 12, 2011, 05:07:11 am
Heh, nice job with the crystal. :P
In another thread the person attached a through hole oscillator to SMD contacts, so if you have a shorter quartz that is through hole, might be worth a shot.
viewtopic.php?f=56&t=3067 (http://dangerousprototypes.com/forum/viewtopic.php?f=56&t=3067)
http://http://dangerousprototypes.com/forum/download/file.php?id=5514&t=1
In another thread the person attached a through hole oscillator to SMD contacts, so if you have a shorter quartz that is through hole, might be worth a shot.
viewtopic.php?f=56&t=3067 (http://dangerousprototypes.com/forum/viewtopic.php?f=56&t=3067)
http://http://dangerousprototypes.com/forum/download/file.php?id=5514&t=1
Title: Re: PICqueno DIP free build - "Quartz tower"
Post by: fcobcn on November 12, 2011, 10:38:19 am
Post by: fcobcn on November 12, 2011, 10:38:19 am
[quote author="hak8or"]
In another thread the person attached a through hole oscillator to SMD contacts, so if you have a shorter quartz that is through hole, might be worth a shot.
[/quote]
Thanks hak8or,
The one I'm using now is trough hole, what I normally do is to take out the plastic part from a smd crystal, put it in the trough hole and bend the pins.
This time I couldn't find a smaller one in my junkbox.
In another thread the person attached a through hole oscillator to SMD contacts, so if you have a shorter quartz that is through hole, might be worth a shot.
[/quote]
Thanks hak8or,
The one I'm using now is trough hole, what I normally do is to take out the plastic part from a smd crystal, put it in the trough hole and bend the pins.
This time I couldn't find a smaller one in my junkbox.
Title: Re: PICqueno DIP free build - "Quartz tower"
Post by: hak8or on November 12, 2011, 07:27:49 pm
Post by: hak8or on November 12, 2011, 07:27:49 pm
Ah, everyone seems to know these cool tricks but me. :(
Well, I personally find the crystal looking cool that way, I for some odd reason prefer the tall crystals instead of the super short SMD ones.
Well, I personally find the crystal looking cool that way, I for some odd reason prefer the tall crystals instead of the super short SMD ones.