Title: IR toy not recognized..
Post by: stealthrt on November 04, 2011, 06:40:56 pm
Post by: stealthrt on November 04, 2011, 06:40:56 pm
It was working then i disconnected it then after awhile i connected it back up and it said this:
Any way to check it and make sure its ok? The power LED stays on once i connect the usb cable. Also, i've tried to jumper the PGC and PGD pins together and then hooking up the USB cable and i get nothing in the device manager showing it sees it.
David
Any way to check it and make sure its ok? The power LED stays on once i connect the usb cable. Also, i've tried to jumper the PGC and PGD pins together and then hooking up the USB cable and i get nothing in the device manager showing it sees it.
David
Title: Re: IR toy not recognized..
Post by: ian on November 08, 2011, 04:30:55 pm
Post by: ian on November 08, 2011, 04:30:55 pm
Quote
Also, i've tried to jumper the PGC and PGD pins together and then hooking up the USB cable and i get nothing in the device manager showing it sees it.
I'm sorry about the problem with the IR Toy, thanks for the report.
It should appear as a HID device, not a serial report. Does the LED (I) light when PGC and PGD are connected? You may be able to follow the normal bootloader instructions to revive it. If not, it may need a reflash or repair, I can help with that.
http://dangerousprototypes.com/docs/USB ... y#Firmware (http://dangerousprototypes.com/docs/USB_Infrared_Toy#Firmware)
Title: Re: IR toy not recognized..
Post by: bhanner95 on March 19, 2016, 01:34:08 am
Post by: bhanner95 on March 19, 2016, 01:34:08 am
I am experiencing this exact issue. How can you help with refresh or repair?