Title: UBW32
Post by: TitanMKD on October 23, 2011, 12:40:26 am
Post by: TitanMKD on October 23, 2011, 12:40:26 am
Hi,
it is just a news about UBW32, I have just received 10 UBW32 PCB(customized a bit with minor changes including my blog webpage on the PCB) from SeedStudio and I have soldered the first one and it is a real success it work like a charm but I was helped by my AOYUE Int968 soldering station and ChipQuik flux.
I'm working on it to develop / port NFC stuff using the cheap (30US$) NFC Shield v0.9b from Seed Studio.
I have already installed the HID Bootloader, and CpuStick (http://www.cpustick.com (http://www.cpustick.com)).
PS for Ian I can send you a free PCB, but contact me to give me your address.
PS for Sjaak I can send you a free PCB, but contact me to give me your address.
See photos in attachement.
[attachment=0]
[attachment=1]
it is just a news about UBW32, I have just received 10 UBW32 PCB(customized a bit with minor changes including my blog webpage on the PCB) from SeedStudio and I have soldered the first one and it is a real success it work like a charm but I was helped by my AOYUE Int968 soldering station and ChipQuik flux.
I'm working on it to develop / port NFC stuff using the cheap (30US$) NFC Shield v0.9b from Seed Studio.
I have already installed the HID Bootloader, and CpuStick (http://www.cpustick.com (http://www.cpustick.com)).
PS for Ian I can send you a free PCB, but contact me to give me your address.
PS for Sjaak I can send you a free PCB, but contact me to give me your address.
See photos in attachement.
[attachment=0]
[attachment=1]
Title: Re: UBW32
Post by: tayken on October 23, 2011, 05:42:54 pm
Post by: tayken on October 23, 2011, 05:42:54 pm
Looking nice, congrats!
PS: What are the holes for? Voltage regulator heatsink?
PS: What are the holes for? Voltage regulator heatsink?
Title: Re: UBW32
Post by: TitanMKD on October 24, 2011, 12:28:07 am
Post by: TitanMKD on October 24, 2011, 12:28:07 am
Hi Tayken,
The holes are for fixing the card in a case or what you want.
Hole are metallized but they are not connected to GND or any other signal on the card.
If you are interested by UBW32 board I can sell you one for a good price like 10USD each PCB including shipping.
I will sell only 5 UBW32 PCB if someone is interested contact me.
Warning: UBW32 PCB requires good soldering skills (with good soldering iron, soldering flux and tweezer) because of PIC32 which is a 100-Pin TQFP and small components like 0603 LED, Resistor ...
I say that because it was my first 100 pin TQFP I soldered and I killed a PCB by testing Kester Flux-Pen which was really volatile flux which burned the PCB connection.
The holes are for fixing the card in a case or what you want.
Hole are metallized but they are not connected to GND or any other signal on the card.
If you are interested by UBW32 board I can sell you one for a good price like 10USD each PCB including shipping.
I will sell only 5 UBW32 PCB if someone is interested contact me.
Warning: UBW32 PCB requires good soldering skills (with good soldering iron, soldering flux and tweezer) because of PIC32 which is a 100-Pin TQFP and small components like 0603 LED, Resistor ...
I say that because it was my first 100 pin TQFP I soldered and I killed a PCB by testing Kester Flux-Pen which was really volatile flux which burned the PCB connection.
Title: Re: UBW32
Post by: tayken on October 24, 2011, 06:23:48 pm
Post by: tayken on October 24, 2011, 06:23:48 pm
I might be interested. Is there a BOM somewhere? I have a standing order where I'll add parts and order sometime next month. But first lets see if some other people are interested. There might be other people who have more free time to play with this board. I will be able to play with this after December (when Make Meeting Tokyo is over)
Title: Re: UBW32
Post by: TitanMKD on October 27, 2011, 07:13:35 pm
Post by: TitanMKD on October 27, 2011, 07:13:35 pm
Some little news about UBW32 + NFC shield v0.9b
I have now a working version of adapted/ported to C code (and heavily modified) of PN532.cpp (from https://github.com/adafruit/PN532/blob/master/PN532.cpp (https://github.com/adafruit/PN532/blob/master/PN532.cpp))
I support Identification of Card and reading of all sectors
See picture in attachment.
[attachment=0]
Output Example:
I have now a working version of adapted/ported to C code (and heavily modified) of PN532.cpp (from https://github.com/adafruit/PN532/blob/master/PN532.cpp (https://github.com/adafruit/PN532/blob/master/PN532.cpp))
I support Identification of Card and reading of all sectors
See picture in attachment.
[attachment=0]
Output Example:
Quote
TitanMKD UBW32 NFC Test with NFC Shield V0.9b
Test timing Delay_ms(123) = delta_ms=123ms delta_us=123049us
getFwVer data(hex): 0x00 0x00 0xFF 0x06 0xFA 0xD5 0x03 0x32 0x01 0x04 0x07 0xEA
getFwVer data(hex): 0x00 0x00 0xFF 0x06 0xFA 0xD5 0x03 0x32 0x01 0x04 0x07 0xEA
Found chip PN532
Firmware Ver:01 Rev:04
Supports 0x07
Waiting Card /
Read card #id=0xXXXXXXXX (not displayed)
AuthenticateBlock0 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block0 data(hex):
XX XX XX XX 65 88 04 00 48 85 14 57 55 90 34 10
AuthenticateBlock1 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block1 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock2 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block2 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock3 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block3 data(hex):
00 00 00 00 00 00 FF 07 80 69 FF FF FF FF FF FF
AuthenticateBlock4 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block4 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock5 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block5 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock6 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block6 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock7 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block7 data(hex):
00 00 00 00 00 00 FF 07 80 69 FF FF FF FF FF FF
AuthenticateBlock8 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block8 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock9 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block9 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock10 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block10 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock11 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block11 data(hex):
00 00 00 00 00 00 FF 07 80 69 FF FF FF FF FF FF
AuthenticateBlock12 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block12 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock13 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block13 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock14 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block14 data(hex):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
AuthenticateBlock15 success with keyA 0xFF,FF,FF,FF,FF,FF
ReadMemory Block15 data(hex):
00 00 00 00 00 00 FF 07 80 69 FF FF FF FF FF FF