Title: Maxim DS2431
Post by: Ben100000 on July 01, 2020, 05:35:41 pm
Post by: Ben100000 on July 01, 2020, 05:35:41 pm
Hi Friends
Just wondering if this is infact encrypted when I try search this the Device Id is weird. This is what I get
1-WIRE>(240)
SEARCH (0xF0)
Macro 1WIRE address
1.- ä a Ê ü
*DS2431 1K EEPROM
Device IDs are available by MACRO, see (0).
1-WIRE>
the screenshot is below. Can anyone point me in the right direction?
Just wondering if this is infact encrypted when I try search this the Device Id is weird. This is what I get
1-WIRE>(240)
SEARCH (0xF0)
Macro 1WIRE address
1.- ä a Ê ü
*DS2431 1K EEPROM
Device IDs are available by MACRO, see (0).
1-WIRE>
the screenshot is below. Can anyone point me in the right direction?
Title: Re: Maxim DS2431
Post by: USBEprom on October 23, 2020, 12:27:01 pm
Post by: USBEprom on October 23, 2020, 12:27:01 pm
Hi Ben100000.
There you should read hexadecimal numbers, whether they are encrypted or plaintext.
Maybe you have problems with connections to the DS2431 chip, or you have omitted something in the configuration of your Bus Pirate.
Did you enabled PULL-UPs on your Bus Pirate?
On your Bus Pirate are you using the STANDARD or OVERDRIVE speed?
Which revision of the Bus Pirate are you using, 3 or 4?
What firmware does your Bus Pirate have?
Thanks.
Be seeing you.
U.Sb
There you should read hexadecimal numbers, whether they are encrypted or plaintext.
Maybe you have problems with connections to the DS2431 chip, or you have omitted something in the configuration of your Bus Pirate.
Did you enabled PULL-UPs on your Bus Pirate?
On your Bus Pirate are you using the STANDARD or OVERDRIVE speed?
Which revision of the Bus Pirate are you using, 3 or 4?
What firmware does your Bus Pirate have?
Thanks.
Be seeing you.
U.Sb
Title: Re: Maxim DS2431
Post by: USBEprom on October 23, 2020, 02:37:00 pm
Post by: USBEprom on October 23, 2020, 02:37:00 pm
@Ben100000.
...and how is the output type set on the Bus Pirate (command "o" [1 HEX / 2. DEC / 3. BIN / 4. RAW])?
Thanks.
Be seeing you.
U.Sb
...and how is the output type set on the Bus Pirate (command "o" [1 HEX / 2. DEC / 3. BIN / 4. RAW])?
Thanks.
Be seeing you.
U.Sb