Text only | Text with Images

Dangerous Prototypes

Dangerous Prototypes => Bus Pirate Support => Topic started by: Tecnico on October 12, 2019, 01:51:50 am

Title: Brick Bus Pirate V3.6
Post by: Tecnico on October 12, 2019, 01:51:50 am
Hello,

I have the BP v.3.6 that I have no communication with, because I have loaded the firmware v6.1 with bootloader v2.
I understand that I will have to charge everything through the PICKIT, right?
Tell me what correct version I have to put firmware and bootloader to my BP.

This is the PICKIT manual. Is he the one who would have to follow?
http://dangerousprototypes.com/docs/Bus_Pirate_v4_and_Pickit2_(bootloader_and_firmware_updates)

Thank you.
Title: Re: Brick Bus Pirate V3.6
Post by: ian on October 12, 2019, 08:41:59 am
In the git repository there is a manufacturing resources folder. That has a complete bootloader plus firmware you can program. However, I don't believe any 3.6 had bootloader 2, that was 3 or 3.1. are you sure it's bricked?
Title: Re: Brick Bus Pirate V3.6
Post by: Tecnico on October 19, 2019, 08:36:10 pm
Quote from: ian on
In the git repository there is a manufacturing resources folder. That has a complete bootloader plus firmware you can program. However, I don't believe any 3.6 had bootloader 2, that was 3 or 3.1. are you sure it's bricked?

Well I deduce that this brick, because when I access the terminal does not give me the bootloader version, even if I make the bridge in pins. Anyway, what are the files (bootloader and firmware) that you indicate to me and that correct version IAN.

If you could help me relive it, I would appreciate it.

Thank you.
Title: Re: Brick Bus Pirate V3.6
Post by: ian on October 22, 2019, 11:35:32 am
Here's one that should work: https://github.com/DangerousPrototypes/Bus_Pirate/tree/master/manufacturing_resources/v3.6/firmware_dump
Title: Re: Brick Bus Pirate V3.6
Post by: Tecnico on October 22, 2019, 11:32:19 pm
I have to follow these steps, right?

Connect 5 pins from pickit 2 to the pirate bus

Finally use these commands:


PD: Do I leave one more step?

Thank you.
Title: Re: Brick Bus Pirate V3.6
Post by: ian on October 23, 2019, 10:09:37 am
If it's a Bus Pirate v3.6 then the chip is PIC24FJ64GA002. I'm sorry, I'm not familiar with pickit2 or how to use it from the command line.
Title: Re: Brick Bus Pirate V3.6
Post by: Tecnico on October 30, 2019, 10:44:55 pm
Thank you very much, I was able to revive the pirate bus with Pickit 2
Text only | Text with Images

( ! ) Fatal error: Uncaught exception 'Elk_Exception' with message 'Please try again. If you come back to this error screen, report the error to an administrator.' in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
( ! ) Elk_Exception: Please try again. If you come back to this error screen, report the error to an administrator. in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
Call Stack
#TimeMemoryFunctionLocation
10.01052074264session_write_close ( )...(null):0
20.01082205856ElkArte\sources\subs\SessionHandler\DatabaseHandler->write( )...(null):0
30.01092206632Database_MySQL->query( ).../DatabaseHandler.php:119
40.05572345368Database_MySQL->error( ).../Db-mysql.class.php:273