| Message |
Board |
Subject |
Date |
| Is there a better substitute for Q1? I have to order it from an expensive supplier anyway. |
Project logs |
Re: Really universal ... |
March 16, 2021, 06:47:56 pm |
| U1 has 0,1V and dropping between Vin and Ground and Q1 has a small hole I did not see the first time.Measured Q1 in diode mod... |
Project logs |
Re: Really universal ... |
March 16, 2021, 05:50:30 pm |
| J3 is completely dead. Nothing on 3,3V or -0,6V I try to find out how I can find out how the darlington on Q1 works in the me... |
Project logs |
Re: Really universal ... |
March 16, 2021, 04:44:05 pm |
| I found the schematic, it does not look much too complicated. So happy to have a device that features this.What is the least ... |
Project logs |
Re: Really universal ... |
March 16, 2021, 03:02:38 pm |
| Oh well, I was soldering a lot of stuff and the tindie board went dead while doing so. I had the usb cable connected to my co... |
Project logs |
Re: Really universal ... |
March 16, 2021, 01:22:14 pm |
| Quote from: afedorov on March 13, 2021, 12:10:39 pmWhat happened to your display? Interleaved rows at the bottom are definite... |
Project logs |
Re: Really universal ... |
March 14, 2021, 12:29:42 pm |
| https://github.com/sparkybg/UniSolder-5.2/tree/2020.04/software/front/US_Firmware.X/dist/PIC32_with_bootloader/productionI in... |
Project logs |
Re: Really universal ... |
March 12, 2021, 03:42:15 pm |
| Quote from: vulkan35 on March 12, 2021, 11:21:02 amboard version 5.2, for you the latest version of the bootloader + firmware... |
Project logs |
Re: Really universal ... |
March 12, 2021, 01:24:37 pm |
| do the tindie boards have the CH1116G chip? After the update I have a white line: https://ibb.co/98gLj4B |
Project logs |
Re: Really universal ... |
March 12, 2021, 11:04:15 am |
| I have some issues with the temperature and stuck in calibration. The iron works fine besides that.Since my 0,1 10 ohm resis... |
Project logs |
Re: Really universal ... |
March 10, 2021, 09:01:44 am |