| Message |
Board |
Subject |
Date |
| Quote from: Doomedahab on January 20, 2021, 09:59:39 amThat's basically the ideal setup in my opinion, although I have the us... |
Project logs |
Re: Really universal ... |
January 21, 2021, 09:02:15 pm |
| Quote from: sparkybg on January 06, 2021, 12:04:13 amI suppose this is C245 on the movie? If yeas, the resistance is definite... |
Project logs |
Re: Really universal ... |
January 09, 2021, 10:15:52 pm |
| Quote from: sparkybg on January 03, 2021, 10:03:51 pmF=full power, H=1/2 power, Q=1/4 power, E=1/8 powerCheck the current sen... |
Project logs |
Re: Really universal ... |
January 05, 2021, 09:53:01 pm |
| Quote from: sparkybg on January 03, 2021, 08:14:21 pmHmm... something is VERY wrong with current sense circuit I guess. The g... |
Project logs |
Re: Really universal ... |
January 03, 2021, 09:51:31 pm |
| Quote from: sparkybg on January 03, 2021, 03:41:39 pmPlease upload a movie of the PC software graphs while the iron is heatin... |
Project logs |
Re: Really universal ... |
January 03, 2021, 07:32:59 pm |
| I used for the last years the DC for powering the unisolder. This is the reason why both plugs (and ac wire) are connected.W... |
Project logs |
Re: Really universal ... |
January 03, 2021, 02:38:57 pm |
|
Project logs |
Re: Really universal ... |
January 03, 2021, 01:22:36 pm |
| Quote from: sparkybg on January 03, 2021, 10:57:07 amEARTH connection is iron-specific. It is connected to the outer shell of... |
Project logs |
Re: Really universal ... |
January 03, 2021, 01:22:11 pm |
| I attached an picture of the calibration menu (with toroidal transformer), the resistor has 10.1 Ohm. When I used it with DC ... |
Project logs |
Re: Really universal ... |
January 03, 2021, 02:59:35 am |
| I built my unisolder in 2017 and used it with a DC power supply. The unisolder ran without any problems and I was very happy... |
Project logs |
Re: Really universal ... |
January 03, 2021, 12:48:05 am |