Skip to main content ↑ ↓

Show Posts

This section allows you to view all Show Posts made by this member. Note that you can only see Show Posts made in areas you currently have access to.

Messages - AndyGoy

1
Web platform / I2C
I thought this may be of help as I have read through the forum that I2C cannot be used as the main pins are in use
I am using the I2C interface for 1 wire via a ds2482-100  and an I2C LCD display
I am using the Alternate pins RB5 and 6
The clue is you cannot set alternate pins via your program if you use the bootloader
As the bootloader is the first program loaded on the PIC it sets the configuration bits
In the bootloader code  add to    FPOR    & ALTI2C_ON  recompile and upload
or in your programmer  load the bootloader hex code, enable ALTI2C  bit in the programmer configuration    and rewrite the bootloader

There also seems some different suggestions for the I2C Baud rate  value
define I2C_BRG 0x188  gives a 98Khz  clock viewed on my digital scope

Below is the I2C  1 wire  test
please see look for my website homemon for detailed graphs

Find all 1 wire devices
Start
i2c online ack OW
Reset = 1
Aresult 1
Found device 1 FA000800C1634510
Search next
Search Done
Found 1 ow device

Obviously  rewriting the bootloader  is done at your own risk.  you will have to upload your program after

( ! ) Fatal error: Uncaught exception 'Elk_Exception' with message 'Please try again. If you come back to this error screen, report the error to an administrator.' in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
( ! ) Elk_Exception: Please try again. If you come back to this error screen, report the error to an administrator. in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
Call Stack
#TimeMemoryFunctionLocation
10.01182248832session_write_close ( )...(null):0
20.01212380408ElkArte\sources\subs\SessionHandler\DatabaseHandler->write( )...(null):0
30.01212381184Database_MySQL->query( ).../DatabaseHandler.php:119
40.05572519904Database_MySQL->error( ).../Db-mysql.class.php:273