Last Thursday arrived with the mail the PIC18F2550 BB, fortunately I had bought all the components and populate the board just take about an hour.
[attachment=2] I soldered all the components except the DC Power Jack, because it was impossible to get in Colombia.
[attachment=1] [attachment=0] By the moment the microcontroller have the CCS example using the Microchips's framework ,the idea is program in the PIC a bootloader, maybe the Microchip's bootloader or the ds30 Loader for PIC18.
Hi guys, recently I had enough time to finish my BPv3.5, after solder and upload the bootloader I upgrade the firmware version (v6.1)and it works well.
[attachment=2] Also I made a simple case (using a mototool) and too corrected the MOSI pull-up bug.
Hi guys, recently I have been working with the dsPICs with some basics application like motors control or like get the image from simple CMOS camera, these are great devices! Would be great make a development board with one of these dsPICs.
Some ideas: - dsPIC33 Series - TQFP 100 o 64 - 12MHz o 16MHz Clock - 32768Khz Clock (for RTC) - USB Powered - FT232 to connect with the PC and update the firmware using a boot-loader - SMT 0805 - Connections for audio applications?
