Skip to main content ↑ ↓

Messages

This section allows you to view all Messages made by this member. Note that you can only see Messages made in areas you currently have access to.

Messages - BiOzZ

4
Bus Pirate Support / Re: Buspirate + saleae logic
[quote author="ian"]
Linky: http://www.instructables.com/id/Realter ... /?ALLSTEPS

Cool! I'll post it up, and mention it in the next BP article. You can use a Bus Pirate picture from dangerousprototypes.com if you like.

Do you like realterm? I use the debugging tool a lot, but it's not my preferred program for a terminal interface. I probably don't know how to use it well.
[/quote]
oh god thank you ^^
i have used it for a long time starting hen i started development on the "i robot: create" so im just used to it
im still working on the graphic interface for extremely easy to use use of the buspirate AND the logic probe and the ability to use them together in one C# app. like you have a 1 wire device talkign to another 1 wire device you put the logic probe in the middle of it let it read the protocall you can single out the command you want than go to the 1 wire buspirate paste it in one form click some check boxes ratio buttons exc and it will give a graphical image of how to connect it and you click send and it will send the necessary information to the buspirate and display the output in the console window :3 ... any thoughts on that? ... i wont need to sped more money on a buspirate 3 to keep the program up tp date with every one else ^^; (after waiting 2 months for my buuspirate2go)

no grammer ... sorry i grew up as a programmer >.<
5
Bus Pirate Support / Re: Buspirate + saleae logic
[quote author="ian"]
It's what I use :)
[/quote]
of coarse your a pro XD
i just made an instructable for interfacing the buspirate with real term if your interested (like if people are overly confused XD)
6
Bus Pirate Support / Re: ***DEAD HACK A DAY PREORDER 2 PROBLEM, SOLUTION*** (v2go)
[quote author="Blodgar"]
while I'm sure you did all of the following, re-checking them might give you a clue as to if the problem is win7 related:  Did you verify settings - e.g. correct USB to Com port #? did you load the FTDI virtual Com port drivers? Verify that your term emulation software was set to COMx/115200/8/1/N/Xon-Xoff? did you try a different term emulator/different OS - e.g. try Tera Term or XP or set your term emulator to run in XP compatibility mode?  Only had a little win7 experience, so...just guessing.
[/quote]

woops i had arduino running and its set to the same com port ... fixed now thank you
7
Bus Pirate Support / Re: ***DEAD HACK A DAY PREORDER 2 PROBLEM, SOLUTION*** (v2go)
[quote author="ian"]
The MODE LED lights when the bootloader (v2+) is active, or when you enter a mode with the 'm' command in the terminal.

The Bus Pirate manual has all the pinouts and command tables:
http://dangerousprototypes.com/bus-pirate-manual/
[/quote]
hi, i just bot back from visiting my brother in law he also got the preorder 2 buspirate i simply traded mine for his so i can go home and re upload the fermware (he was SUPER pissed that it did not come preloaded) and after i did that followed all the same steps i did before its not responding to ANY commands i send to it ... i use RealTerm and its not getting anything .. any thoughts?
9
Bus Pirate Support / Re: ***DEAD HACK A DAY PREORDER 2 PROBLEM, SOLUTION*** (v2go)
[quote author="ian"]
Glad you got it working. Thanks for the update. What's the first thing you're going to interface?
[/quote]
replacing a crystal in an AVR based simple computer i made in the 9th grade with a digital oscillator that uses I2C protocol XD
where do i connect the SCL and the SDA?
also the MODE light no longer lights is that normal?
10
Bus Pirate Support / Re: ***DEAD HACK A DAY PREORDER 2 PROBLEM, SOLUTION*** (v2go)
[quote author="ian"]
Try installing the Microchip APP note linked in the firmware update guide, it will install the .ocx.

Not sure if it's compatible with Windows Vista/7. If it won't work on Vista/7, you can also try using the Pyton updater.
Quote
If you get an error about a missing comdlg32.ocx when you run the quick programmer, install the sample code from Microchip application note AN1157.
[/quote]

thanks i finally got it to work after some minor modifications with the .ocx file :3
11
Bus Pirate Support / Your Buspirate Cables
here you can post any cables you may have made for your pirate
i just got mine today and i want to know what u guys have made
here is mine for bread board use
14
Bus Pirate Support / Re: LCD HD44780 adapter board preorder
will [quote author="ian"]
I can have HD44780 LCD adapter board kits made at Seeed Studio for $15 each, including worldwide shipping. I might be able to get a combined discount on this and the 3EEPROM explorer board.

If there's no interest now, I might still organize a few kits when the Bus Pirate v3 preorder starts.
[/quote]
will it work with http://www.sparkfun.com/commerce/produc ... cts_id=710 or is it a text interface?

( ! ) Fatal error: Uncaught exception 'Elk_Exception' with message 'Please try again. If you come back to this error screen, report the error to an administrator.' in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
( ! ) Elk_Exception: Please try again. If you come back to this error screen, report the error to an administrator. in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
Call Stack
#TimeMemoryFunctionLocation
10.01922432064session_write_close ( )...(null):0
20.01962563672ElkArte\sources\subs\SessionHandler\DatabaseHandler->write( )...(null):0
30.01962564448Database_MySQL->query( ).../DatabaseHandler.php:119
40.06362703200Database_MySQL->error( ).../Db-mysql.class.php:273