Skip to main content ↑ ↓

Messages

This section allows you to view all Messages made by this member. Note that you can only see Messages made in areas you currently have access to.

Messages - kbulgrien

1
Bus Pirate Development / Re: bootloader v4 console utility
Regarding forum topic:

   http://whereisian.com/forum/index.php?topic=296.0

I had a case where pirate_loader_lnx failed on an 850MHz system.  In the thread I give a patch to pirate-loader.c that fixes the problem on this old computer.  It is:

Code: [Select]
$ svn diff
Index: bootloader-v4/pirate-loader/source/pirate-loader.c
===================================================================
--- bootloader-v4/pirate-loader/source/pirate-loader.c  (revision 313)
+++ bootloader-v4/pirate-loader/source/pirate-loader.c  (working copy)
@@ -459,6 +459,7 @@
                        
                        puts("OK");
                        
+                       sleep(0);
                        if( g_verbose ) {
                                dumpHex(command, HEADER_LENGTH + command[LENGTH_OFFSET]);
                        }
2
Bus Pirate Support / Re: Cannot upgrade buspirate; cannot use it either. Stuck.
@ian, I am not unhappy with your support.

If the following patch is applied to pirate-loader.c, the download works just fine on my slow PC.

Code: [Select]
$ svn diff
Index: bootloader-v4/pirate-loader/source/pirate-loader.c
===================================================================
--- bootloader-v4/pirate-loader/source/pirate-loader.c  (revision 313)
+++ bootloader-v4/pirate-loader/source/pirate-loader.c  (working copy)
@@ -458,7 +458,7 @@
                        }
                        
                        puts("OK");
-                       
+                       sleep(0);
                        if( g_verbose ) {
                                dumpHex(command, HEADER_LENGTH + command[LENGTH_OFFSET]);
                        }
3
Bus Pirate Support / Re: Cannot upgrade buspirate; cannot use it either. Stuck.
Slow system that failed:

# modinfo ftdi_sio | grep -v alias:
filename:       /lib/modules/2.6.27.37-server-1mnb/kernel/drivers/usb/serial/ftdi_sio.ko.gz
license:        GPL
description:    USB FTDI Serial Converters Driver
author:         Greg Kroah-Hartman , Bill Ryder , Kuba Ober
depends:        usbserial,usbcore
vermagic:       2.6.27.37-server-1mnb SMP mod_unload 686
parm:           debug:Debug enabled or not (bool)
parm:           product:ushort
parm:           vendor:User specified vendor ID (default=0x0403) (ushort)

Fast system that worked (Core2 Duo):

# modinfo ftdi_sio | grep -v alias
filename:       /lib/modules/2.6.27.24-desktop-2mnb/kernel/drivers/usb/serial/ftdi_sio.ko.gz
license:        GPL
description:    USB FTDI Serial Converters Driver
author:         Greg Kroah-Hartman , Bill Ryder , Kuba Ober
depends:        usbserial,usbcore
vermagic:       2.6.27.24-desktop-2mnb SMP mod_unload
parm:           debug:Debug enabled or not (bool)
parm:           product:ushort
parm:           vendor:User specified vendor ID (default=0x0403) (ushort)

Is the above what you mean?

During my troubleshooting I did consider CPU load.  In the beginning I had a stuck process that was filling up CPU, so I killed it and restarted X to get back to not having any load.  CPU load was negligible at start of upload.  I did not track the CPU load during the update process.  I guess now that I have the thing working again, I'm kind of not wanting to risk bricking it.  I just got the pirate yesterday after waiting almost a month for it.

IMO pirate-loader_lnx should not have to soak up all CPU, and that it could be made to be a little less demanding on a system even though USB is demanding.  Wonder if `nice` would have helped.  Putting in a few ms of sleeps at strategic points in the process might be worth considering.
5
Bus Pirate Support / Re: Cannot upgrade buspirate; cannot use it either. Stuck.
Well, I pulled the BusPirate stuff over on to the 3.2 GHz i86_64 system and pirate-loader_lnx did just fine on it.  :-) No more bricks...

HiZ>i
Bus Pirate v3
Firmware v4.1 Bootloader v4.1
DEVID:0x0447 REVID:0x3043 (B5)

Sad day though when you need a space heater to blow a little firmware down onto a microcontroller... One would think 850MHz wasn't _that_ slow.
6
Bus Pirate Support / Re: Cannot upgrade buspirate; cannot use it either. Stuck.
[quote author="Sjaak"]
[quote author="Sjaak"]
Errorcode 4e is checksumerror, could you verify the USB drivers or could you try to upload it with the mono version or a windows machine?
[/quote]

Could you give this a try? Also which upgrader.hex did you exactly run (please provide the exact filename)?
[/quote]

From command history:

python P24qp.py -a BPv3-v2blupdaterVa3-v4.1.hex -s /dev/ttyUSB0 -v

pirate-loader_lnx --dev=/dev/ttyUSB0 --hex=v4firmware/BPv3-Firmware-v4.1.hex
7
Bus Pirate Support / Re: Cannot upgrade buspirate; cannot use it either. Stuck.
[quote author="Sjaak"]
the bootloader version 1.02 is correct. We use a bootloader from a third party, and their version is 1.02. I agree that is it confusing, but this is what buspirate calls v4 bootloader (which actually refers to version of the main payload).

Errorcode 4e is checksumerror, could you verify the USB drivers or could you try to upload it with the mono version or a windows machine?
[/quote]

Thanks.  I figured it was correct, but did not know how to reconcile v4 bootloader with a self displayed version of 1.02 when p24qp reported a version of 1.2 when I used the -i parameter.

I don't know what you mean by verifying the USB drivers.  How, and which ones?  I got RXTX from its website just last night.  All my other USB devices work... keyboard, mouse, thumb drive... and I was accessing the buspirate with the same system (self-test, etc.) via USB before I updated.  This operation is the first hint that something was wrong.

  libusb0.1_4-0.1.12-12mdv2009.0

I do not have a Windows license other than for Windows 98.  Even if I could, which I don't know, I would not load .net on it for various reasons.

My 32-bit system has only ICEwm (not a heavy IDE) etc.  Loading Mono on it is not something I want to do.  It is an Athlon 850 and does not need a bunch of heavy stuff on it.  I could try putting mono on my x86_64 system I guess - as this buspirate is a brick at the moment, but I've found that generally x86_64 is not where I want to go if I have trouble with 32-bit.  I am not a fan of GUIs with requirements like mono for doing low-level things like firmware updating.
8
Bus Pirate Support / Re: Cannot upgrade buspirate; cannot use it either. Stuck.
Quote
What parts of the upgrade were successful?
Everything appeared to work correctly up to this fail point.

Quote
Were you able to connect to the upgrader with a terminal, type 'yes', etc?
Yes.

Quote
Did the dialog indicate success?
Yes. I cannot say I understood all the messages.  I went with "Success!" being adequate.

Quote
Did you have any false starts, like trying to upload a v4 with p24qp? That will destroy the config fuses.
I never attempted loading the v4 firmware with p24qp.  I did try loading the v4 bootloader many times with p24qp.py because I had many errors in the A8xx range and the instructions I had did not say they were okay.  Eventually I found the FAQ that said that was ok, so I started the whole process over and followed the FAQ step by step.
9
Bus Pirate Support / Re: Cannot upgrade buspirate; cannot use it either. Stuck.
I don't understand why it says "Bootloader version: 1,02" as I did the bootloader update.

  $ python P24qp.py -a BPv3-v2blupdaterVa3-v4.1.hex -s /dev/ttyUSB0 -v

P24qp.py no longer seems to be able to talk to the buspirate re:

  $ python P24qp.py --config=P24qp.ini -s /dev/ttyUSB0 -i

Hopefully that means the bootloader is right.
10
Bus Pirate Support / Cannot upgrade buspirate; cannot use it either. Stuck.
So I followed the FAQ to this point:

- use the new program (ds30loader or the commandline util) to upload a v4+ buspirate firmware

I cannot proceed past this point.  All attempts to program using the commandline utility fail at random points during the update attempt:

$ ./pirate-loader_lnx --dev=/dev/ttyUSB3 --hex=v4firmware/BPv3-Firmware-v4.1.hex
+++++++++++++++++++++++++++++++++++++++++++
  Pirate-Loader for BP with Bootloader v4+ 
  Loader version: 1.0.0  OS: Linux
+++++++++++++++++++++++++++++++++++++++++++

Parsing HEX file [v4firmware/BPv3-Firmware-v4.1.hex]
Found 21503 words (64509 bytes)
Fixing bootloader/userprogram jumps
Opening serial device /dev/ttyUSB3...OK
Configuring serial port settings...OK
Sending Hello to the Bootloader...OK

Device ID: PIC24FJ64GA002 [d4]
Bootloader version: 1,02
Erasing page 0, 0000...OK
Writing page 0 row 0, 0000...OK

...

Writing page 4 row 33, 1080...ERROR [4e]

Error updating firmware :(

Highest I have ever gotten is page 13.

I can no longer connect to it with a terminal...

( ! ) Fatal error: Uncaught exception 'Elk_Exception' with message 'Please try again. If you come back to this error screen, report the error to an administrator.' in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
( ! ) Elk_Exception: Please try again. If you come back to this error screen, report the error to an administrator. in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
Call Stack
#TimeMemoryFunctionLocation
10.01532379456session_write_close ( )...(null):0
20.01562511048ElkArte\sources\subs\SessionHandler\DatabaseHandler->write( )...(null):0
30.01562511824Database_MySQL->query( ).../DatabaseHandler.php:119
40.06002650560Database_MySQL->error( ).../Db-mysql.class.php:273