Dangerous Prototypes Open Source Hardware

I want to see how R is moving on 2.45 display. This was the main reason I made 4-layer board.

It is stable enough. +/-2 on R is pretty nice.

And with larger display?

Simply gorgeous.

Yes, this is the latest.

Yes, this is the latest.

For especially gifted people, I suggest that the whole forum make a flash mob - if you don’t write in English then smoke nervously on the sidelines and you don’t receive any answers to your questions and suggestions until you respect all the people who are here and that’s all, I PLEASE SUPPORT ME ALL

Upload to YouTube and give a link.

And the video must be without instrument and with 10 ohm resistor for calibration! This way I can see the ADC and R moving. It must show 0 128 for the "current" parameter.

Now remove the instrument, put 10ohm calibration resistance between SENSEA and Vout1-, and make a small movie of calibration menu.

With all 6 wires between front and back, wired as I said!!! This is IMPORTANT!!!

There is a problem with your thinking. I answered other people’s questions, "You are Chinese, making a finished unisolder." What stimulates you? Opening your mouth is foul language! I'm from Hong Kong, China, any questions? There is an old Chinese saying, "Don't do bad things, don't be afraid of ghosts knocking on the door"! What is wrong with you?