Skip to main content ↑ ↓

Show Posts

This section allows you to view all Show Posts made by this member. Note that you can only see Show Posts made in areas you currently have access to.

Messages - mogorman

1
AVRDude / Re: avrdude: initialization failed, rc=-2
Hi.  I am getting the same problem, but for a different reason I think.  My bus pirate only powers up my avr for a few hundred milliseconds.  I have also tried applying external power to the board, both 3 and 5 volts from the bus pirate and my external power supply.  Any guesses or thoughts as to why?  Below is an output of my error. except without links as spam filter is yelling at me


avrdude -v -F  -c buspirate -p m328p -P /dev/buspirate -b 115200 -B 10

avrdude: Version 5.10, compiled on Jun 27 2010 at 00:38:29
        Copyright (c) 2000-2005 Brian Dean,
        Copyright (c) 2007-2009 Joerg Wunsch

        System wide configuration file is "/etc/avrdude.conf"
        User configuration file is "/home/mog/.avrduderc"
        User configuration file does not exist or is not a regular file, skipping

        Using Port                    : /dev/buspirate
        Using Programmer              : buspirate
        Overriding Baud Rate          : 115200
        Setting bit clk period        : 10.0
        AVR Part                      : ATMEGA328P
        Chip Erase delay              : 9000 us
        PAGEL                        : PD7
        BS2                          : PC2
        RESET disposition            : dedicated
        RETRY pulse                  : SCK
        serial program mode          : yes
        parallel program mode        : yes
        Timeout                      : 200
        StabDelay                    : 100
        CmdexeDelay                  : 25
        SyncLoops                    : 32
        ByteDelay                    : 0
        PollIndex                    : 3
        PollValue                    : 0x53
        Memory Detail                :

                                  Block Poll              Page                      Polled
          Memory Type Mode Delay Size  Indx Paged  Size  Size #Pages MinW  MaxW  ReadBack
          ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
          eeprom        65    5    4    0 no      1024    4      0  3600  3600 0xff 0xff
          flash        65    6  128    0 yes    32768  128    256  4500  4500 0xff 0xff
          lfuse          0    0    0    0 no          1    0      0  4500  4500 0x00 0x00
          hfuse          0    0    0    0 no          1    0      0  4500  4500 0x00 0x00
          efuse          0    0    0    0 no          1    0      0  4500  4500 0x00 0x00
          lock          0    0    0    0 no          1    0      0  4500  4500 0x00 0x00
          calibration    0    0    0    0 no          1    0      0    0    0 0x00 0x00
          signature      0    0    0    0 no          3    0      0    0    0 0x00 0x00

        Programmer Type : BusPirate
        Description    : The Bus Pirate

Detecting BusPirate...
avrdude: buspirate_readline(): #
avrdude: buspirate_readline(): RESET
avrdude: buspirate_readline():
** 
avrdude: buspirate_readline(): Bus Pirate v3a
**  Bus Pirate v3a
avrdude: buspirate_readline(): Firmware v5.10 (r559)  Bootloader v4.4
**  Firmware v5.10 (r559)  Bootloader v4.4
avrdude: buspirate_readline(): DEVID:0x0447 REVID:0x3046 (24FJ64GA002 B8)
**  DEVID:0x0447 REVID:0x3046 (24FJ64GA002 B8)
avrdude: buspirate_readline():
** 
avrdude: buspirate_readline(): HiZ>
**
BusPirate: using BINARY mode
BusPirate binmode version: 1
BusPirate SPI version: 1
avrdude: initialization failed, rc=-2
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x000000
avrdude: Yikes!  Invalid device signature.
avrdude: Expected signature for ATMEGA328P is 1E 95 0F
BusPirate is back in the text mode

avrdude done.  Thank you.

( ! ) Fatal error: Uncaught exception 'Elk_Exception' with message 'Please try again. If you come back to this error screen, report the error to an administrator.' in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
( ! ) Elk_Exception: Please try again. If you come back to this error screen, report the error to an administrator. in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
Call Stack
#TimeMemoryFunctionLocation
10.01192270544session_write_close ( )...(null):0
20.01232402120ElkArte\sources\subs\SessionHandler\DatabaseHandler->write( )...(null):0
30.01232402896Database_MySQL->query( ).../DatabaseHandler.php:119
40.05732541616Database_MySQL->error( ).../Db-mysql.class.php:273