Skip to main content ↑ ↓

Show Posts

This section allows you to view all Show Posts made by this member. Note that you can only see Show Posts made in areas you currently have access to.

Messages - sunny1

2
Tools of the trade / Re: High speed Pick & Place for $3600
Dear Allan from UK, dear Michael from Germany, dear Tim from USA and dear our customers & friends,

I'm Sunny from http://www.hothotsmtmachine.com

At the beginning, we just read the message here and don't send anthing. Because this post link is from Neoden company and it's ONLY for pick and place machine technology discussion...But we find that it's becoming Neoden is using the Dangerous to beat & slander other competitors. That is so bad.

We never say Neoden machine is bad and we sold their machine before. But finally, they do the oversea market by themselves after they grow up enough and try to control the whold market use every kind of methods that is we can't control and we dislike to do the same too.

From here, we only want to say
3
Tools of the trade / Introduce SMT50 pick and place machine WITH VISION
Hello, everyone,

Good day.

I'm Sunny come from HOT HOT International Import & Export Co., Ltd.

Today I'm glad to introduce our HOT selling SMT50 pick and place machine WITH VISION to you.

Video:
http://i.youku.com/u/UNDMzNTE1NTEy                                         
http://i.youku.com/u/UNDMzNTE1NTEy/playlists 

http://v.youku.com/v_show/id_XNDE1MzU2MDQ4.html
https://www.youtube.com/playlist?list=P ... Fs4PbKlDCG 

Introduction:
Suitable for small-scale production, research and personal DIY automatic placement machine. Included 360 degree continuous rotation vacuum nozzle, aluminum machine, can be attached to most of the above components SMD 0603 chip components and SOIC.
It is the best choice for majority of small and medium enterprises, science and research institutions and individuals.
Software defined feeders possible to support strips or trays inside the working area.

Features:
* Internal machine controller board for speed and accuracy.
* PC Software used to prepare the placement jobs and control the machine.
* Supported languages Chinese and English.
* 360 degree continuous mounts at any angle.
* Drag feeding mode
* PCB supports batch import data directly, without having to manually enter the coordinates, greatly reduce data entry work.
* Automatically adjust the height according to the Z-axis mount component height, do not fight or die hard hit PCB board.
* Have up to 36 feeder lines (north and west feeder equipped), each adjustable in pickup position, height, speed, alignment mode
* Powerful batch mount feature, you can mount a continuous subsidies, free to choose placement strategy.
* The mounting process can be stopped or paused at any position and started again.
* Freedom to set placement speed and acceleration stored in preset tables and can be assigned to every placed component.
* Top camera can be used to test for each feeding coordinates and component placement coordinates.
* Support PCB board MARK point visual recognition.
* The working table is made from 20mm aluminum for stable and high positioning accuracy.
* Round precision guide.
* High Quality Japanese stepper motors.

Specification
Mounting accuracy: ±0.05MM
Applicable PCB: 230×230
Mounting capability: 1800 components per hour
XY axis moving range: 400×400
Applicable components: 0402、0603、0805、1206…SOP,QF，BGA and so on
Positing mode: Video correction for angle and offset, different adjustment modes for IC and chips
Transmission mode: Stepper motor + Polyurethane industrial synchronous belt transmission
PC operating system requirements: Windows XP, Windows 7 Ultimate
Feeding: drag
Compressed air: 0.8Mkp
Power supply: 230V, 50Hz (Convertible to 110V…)
Power consumption: 220W
Machine volume: 660*600*400mm
Machine volume after packed: 720*660*460mm
Gross Weight : 75-80KG (without packing: 45KG)
Packing size: 0.32m³

The standard list for shipment:
1. The machine SMT50
2. The west feeder having 20x 8mm lines
3. The suction nozzle large, middle and small: 3 for each size
4. CD
5. The power cord + air pipe

Note: the pump & computer should be prepared by you.

Extras:
North feeder
Second bottom camera
Tray feeder


** If you have any questions feel free to contact with us. Thank you~

E-mail: info@hothotsmtmachine.com

( ! ) Fatal error: Uncaught exception 'Elk_Exception' with message 'Please try again. If you come back to this error screen, report the error to an administrator.' in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
( ! ) Elk_Exception: Please try again. If you come back to this error screen, report the error to an administrator. in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
Call Stack
#TimeMemoryFunctionLocation
10.01292304880session_write_close ( )...(null):0
20.01322436456ElkArte\sources\subs\SessionHandler\DatabaseHandler->write( )...(null):0
30.01322437232Database_MySQL->query( ).../DatabaseHandler.php:119
40.05812575952Database_MySQL->error( ).../Db-mysql.class.php:273