just wanted to tell you about a new project I've been working on. It's a method to flash an arduino via WiFi using the ESP8266. You can read more about it here.
I finally received the HanRun Rj45 connector and soldered in the free PCB I received some time ago. There are still 6 passives I didn't have so I'm waiting for them to start testing the board with the Microchip Stack.
Hi Ian, I'm using the bus pirate as a logic analyzer with jawi's client. With firmware 5.10 everything work perfect, but with firmware 6.0 I can't capture data with sampling rates higher than 1 KHz. I've tried the client's versions 0.95 beta 2 and 0.95 final with both firmwares (5.10 and 6.0) in Linux and Windows with 32 and 64 bits java 1.6 u30 and 1.7 u2, with the same results (not working at higher than 1 KHz sample rate). Sorry if this is the wrong place to post this problem.
I've just finished assemblying the Bus Pirate v3.5 free PCB I got a few moonths ago. Unfortunatelly mouser didn't have the ft232 chip in stock or I'd have finished sooner! I've also had a problem soldering the ft232 chip as my soldering iron temperature was set so high.