Skip to main content ↑ ↓

Show Posts

This section allows you to view all Show Posts made by this member. Note that you can only see Show Posts made in areas you currently have access to.

Messages - frpr666

1
Bus Blaster JTAG debugger / Re: Newbie: Bus Blaster v2 + yagarto
Thank you for the reply,
I ended up with working BusBlaster v2 under WinXP under Cygwin. I simply copy the BB2 config from "dangerousprototypes.com" to
"myWinHome/openocd/tcl/interface/busblaster.cfg". Now it works fine.
$openocd -f ../tcl/interface/busblaster.cfg -f ../tcl/target/stm32f1x.cfg.  Im going to setup the yagarto IDE to co-operate with OOCD and GDB but I don't know how to do it. Anyway the BusBlaster v2 is great and cheap tool.
2
Bus Blaster JTAG debugger / Newbie: Bus Blaster v2 + yagarto
edit1 Q was shorted>
Hello,

I'm new user at Yagarto toolchain.
I bought Bus Blaster v2 and I want to use it to program (flash) STM32F103RB target.

I follow the checklist given by the guide:
"Using_Open_Source_Tools_for_AT91SAM7S_Cross_Development_revision_C.pdf" (James P. Lynch).

Now I stand at the point:
------------------------
I want program the STM32F103RB target (olimex board). I think it is done by adding "program" rule to "makefile" as the guide says. But it doesn't work. There is an "openocd-flash-program.cfg". Where could I get it please? Next question: Is there a guide how to set the toolchain (eclipse) to work with Bus Blaster v2 as debug tool for STM32 target? Could anyone point me please to correct makefile for "program" and "debug"?
3
Open Bench Logic Sniffer / Re: Alternative Java client
@Jawi: the client get freeze when I try change the com-port combobox. After that I can't do anything with the window Caputure settings. I tried to wait but it's still the same. . I will try it under win XP on Monday. Maybe it is issue of my win. 2000. Sometimes I have troubles with runnig java apps. as Processing or Arduino.
4
Open Bench Logic Sniffer / Re: Alternative Java client
Hallo,
I have downloaded http://www.lxtreme.nl/ols/ols-0.9.0.tar.gz. I unpacked it to folder E:programsLogicSniffer2 and ran console and run.bat. When I want change the COM port, the client is frozen. Logic Analyzer Client->Caputure settings->Analyzer port. Is there some workaround?
Code: [Select]
Microsoft Windows 2000 [Verze 5.00.2195]
(C) Copyright 1985-2000 Microsoft Corp.

E:programsLogicSniffer2>path
PATH=C:Program FilesCommon FilesSiemensSqlany;
etc.;
etc.;
etc.;
C:programsJavajdk1.6.0_22bin;C:programsJavajre6bi
n;E:programsLogicSniffer2

E:programsLogicSniffer2>java -version
java version "1.6.0_22"
Java(TM) SE Runtime Environment (build 1.6.0_22-b04)
Java HotSpot(TM) Client VM (build 17.1-b03, mixed mode, sharing)

E:programsLogicSniffer2>run.bat
Oct 31, 2010 10:51:15 AM nl.lxtreme.ols.client.Host start
INFO: LogicSniffer v0.9.0 started ...
WARNING:  RXTX Version mismatch
        Jar version = RXTX-2.2
        native lib Version = RXTX-2.2pre2

If I try the original client it works well. Gadget Factory->OpenBench Logic Sniffer->Files->OpenBench_LogicSniffer_JAVA_CLIENT_2.1.zip
5
Open Bench Logic Sniffer / Re: Ubuntu Installation Progress
I use this one: Gadget Factory->OpenBench Logic Sniffer->Files->OpenBench_LogicSniffer_JAVA_CLIENT_2.1.zip.
I tried it under Ubuntu 10.04 and under Windows XP, both works well. I'm only an experienced hobbyst. I can say it is more than it costs. Very usefull.

( ! ) Fatal error: Uncaught exception 'Elk_Exception' with message 'Please try again. If you come back to this error screen, report the error to an administrator.' in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
( ! ) Elk_Exception: Please try again. If you come back to this error screen, report the error to an administrator. in /var/www/dangerousprototypes/forum/sources/database/Db-mysql.class.php on line 696
Call Stack
#TimeMemoryFunctionLocation
10.01392326128session_write_close ( )...(null):0
20.01422457704ElkArte\sources\subs\SessionHandler\DatabaseHandler->write( )...(null):0
30.01422458480Database_MySQL->query( ).../DatabaseHandler.php:119
40.05572597192Database_MySQL->error( ).../Db-mysql.class.php:273