Videos

From DP

Revision as of 12:29, 23 August 2012 by Lynn (Talk | contribs)
Jump to: navigation , search
Videos-WorkshopVideo No35.pngWorkshop Video #35: Singapore Mini Maker Faire 2012 report


Singapore’s Mini Maker Faire had a bunch of unforgettable projects. Check out improvised instruments, PC-controlled toys, a Twitter controlled blimp, the banana piano, a DIY Aquaponics system, and a sling shot controlled Angry Birds clone.

Videos-GlobalGeekTour-No34.pngGLOBAL GEEK #34: Singapore markets and hackerspace


Visit the major electronics shops in Singapore, and get a guided tour of the Singapore hackerspace. This weekend we were in Singapore for the Maker Faire, so we took a day to do a geek tour. This kicks off the second season of our Global Geek Tours.

Videos-WorkshopVideo-No33.pngWORKSHOP VIDEO #33: Zoom H1 v2 sound test and Singapore Maker Faire

We got tired of using integrated cam mics for our videos so we bought a Zoom H1 v2 recorder ahead of our Singapore Maker Faire visit. This quick workshop video tests our new sound setup.

Videos WorkshopVideo-No32.pngWORKSHOP VIDEO #32: Sick of Beige standard PCB templates and cases


Are you sick of beige project boxes that hide your cool board and hard work? Wouldn’t it be cool if your project was case ready from the first revision?

Sick of Beige cases are simple protectors and enclosures for hobby electronics project. Design your project with our standard PCB templates and it’s ready for an enclosure.

Videos-Workshop-Video-No31.pngWORKSHOP VIDEO #31: Bus Pirate LCD Adapter v3 overview and demo


EEVblog brought up the Bus Pirate LCD adapter this week, so we though it was a good time to talk about the latest v3 hardware revision and do a simple demo. This is a small board that has everything needed to control and test common HD44780 LCD character displays with the Bus Pirate.

Videos-Workshop-Video-No30.pngWORKSHOP VIDEO #30: Favorite Bus Pirate features


Voltage measurements with the Bus Pirate ADC pin are easier than working with a separate multimeter on an analog project. We read a voltage from an MCP4725 I2C digital to analog converter in the demo using the d and D (continuous) voltage measurement commands.

Videos-WorkshopVideo No29.pngWORKSHOP VIDEO #29: Exploring the serial port


While USB is all around us, the humble (virtual) serial port is still everywhere. Today we explore the serial interface on the Infrared Toy, Bus Pirate, and Logic Sniffer. See a demonstration of the binary interfaces and commands normally used only by software utilities. Grab some terminal software like Tera Term, and Hercules and follow along.

Videos-WorkshopVideo-No28.pngWORKSHOP VIDEO #28: ATX Breakout Board


Old ATX computer power supplies are cheap-to-free, and make great lab supplies if you’re willing to add a resistor and short a few wires. Sjaak whipped up an ATX breakout board as an easier way tap and control an ATX supply without any messy hacks.

Videos-WorkshopVideo-No27.pngWORKSHOP VIDEO #27: How to make a simple soldering flux


Flux is a wonderful goo that makes soldering faster and easier. In previous videos we compared different types of commercial flux (Flux off 1, Flux off 2), but did you know it’s possible to make a simple and effective flux at home? We’ll get you started, and don’t miss the giveaway at the end of the video.

Video-WorkshopVideo-No26.pngWORKSHOP VIDEO #26: Get your open hardware manufactured


We look at the four common ways open hardware is commonly manufactured, and show the package of files we send to get our stuff made.

Video-No25.pngVIDEO #25: Project interviews at Bay Area Maker Faire 2012


Here’s some new and extended project interviews from Bay Area Maker Faire 2012. These took place at the setup, faire, and after party. Generally a few people bring projects to show us, so we interviewed them right at our own table.

300pxHOW-TO VIDEO #24: Bay Area Maker Faire 2012