USB Infrared Toy v2 manufacturing resources

From DP

Revision as of 14:23, 22 February 2011 by Ian (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation , search

Setup

  1. Connect a USB cable for power
  2. Program the complete firmware image (-DUMP.HEX) with a programmer

Test procedure

This procedure tests the PIC, LED circuit, and both receiver circuits. 



  1. Plug in the USB cable

  2. Run the test app, change COM10 to match your system: imageviewer.exe -p com10 -T -a

  3. Follow the instructions (point the IR Toy towards something like a table)

  4. Verify: LED should be on

  5. Verify: self-test will display **PASS** or **FAIL**



The IR LED will remain on after the self-test. The infrared light can be viewed with a camera/web cam/video camera/etc.





Retrieved from "http://dangerousprototypes.com/docs/USB_Infrared_Toy_v2_manufacturing_resources"