USB IR Toy v1.1 update

From DP

Revision as of 11:39, 23 September 2010 by Lynn (Talk | contribs)
Jump to: navigation , search
USB IR Toy v1.1 update
Codename None
Status Final partlist
Development development forum
ID # {{{id}}}

Contents

Development

Design preview and discussion

Prototypes

Irtoy11-pcb-frequencydetector.png

Irtoy11-pcb.png Irtoy11-pcb-back.jpg Irtoy-pcb-newboard.png

Latest Schematic

Usb-ir-toy-v2-cct.png

Early schematic

Irtoyv2-cct.pngIrtoy11-cct.png

Latest PCB

Usb-ir-toy-v2-brd.png

Early PCB

Irtoyv2-brd.pngIrtoy-brd.png

Partlist

Part Value
C1 0.1uF capacitor (0805)
C2, C4, C7 [0.22uF capacitor] (0805)
C5,C6 27pF capacitor (0805)
C8 [1.0uF capacitor] (0805)
D1 Small signal diode (DO323)
IC1 PIC 18F2550-i/so (SOIC28W)
J1 [USB MINI-B jack] (SMD)
Q1 20MHz crystal (SMD/HC49UP)
R1, R6 10,000 ohm resistor (0805)
R2 2700 ohm resistor (0805)
R3 390 ohm resistor (0805)
R4 [XXX ohm resistor] (0805) TX current limiter
R5 1000 ohm resistor (0805)
T1 [NPN transistor, hfe 40+, 1A+] (SOT23)
I indicator LED (0805)
RX 5volt 38kHz IR receiver (eg: TSOP38238)
RX2 [QSE159 IR photosensor]
TX [Wide angle ~940nm IR LED] (5mm)
Pin headers 0.1" pin header (optional)
S1 small tactile switch (optional)

Frequency measurement

Irfreq-tests.png

Links

QSE159 frequency counter