USB IR Toy v1.1 update

From DP

Revision as of 10:59, 23 September 2010 by Ian (Talk | contribs)
Jump to: navigation , search
USB IR Toy v1.1 update
Codename None
Status Final partlist
Development development forum
ID # {{{id}}}

Contents

Development

Design preview and discussion

Prototypes

Irtoy11-pcb-frequencydetector.png

Irtoy11-pcb.png Irtoy11-pcb-back.jpg Irtoy-pcb-newboard.png

Latest Schematic

Irtoyv2-cct.png

Early schematic

Irtoy11-cct.png

Latest PCB

Irtoyv2-brd.png

Early PCB

Irtoy-brd.png

Partlist

Partlist

Part Value
C1-C4 0.1uF capacitor (0805)
C5,C6 27pF capacitor (0805)
D1 Small signal diode (DO323)
IC1 PIC 18F2550-i/so (SOIC28W)
ICSP 0.1" pin header (1x05)
J1 USB MINI-B jack (SMD)
Q1 20MHz crystal (SMD/HC49UP)
R1 10,000 ohm resistor (0805)
R2 2700 ohm resistor (0805)
R3 390 ohm resistor (0805)
R4 180 ohm resistor (0805)
R5 1000 ohm resistor (0805)
T1 NPN transistor, hfe 30+, 200mA+ (0805)
I indicator LED (0805)
RX 5volt 38kHz IR receiver (eg: TSOP38238)
TX ~940nm, 20mA IR LED (5mm) preorder 1 used SFH-480 ~880nm, 200mA IR LED
S1 small tactile switch (optional)

Frequency measurement

Irfreq-tests.png

Links

QSE159 frequency counter