Logic Sniffer: OLS-loader utility

From DP

Revision as of 16:50, 4 October 2010 by Jamz (Talk | contribs)
Jump to: navigation , search

This utility is used to load new bitstreams for the FPGA. A bitstream update changes the logic that captures and stores samples.

Contents

Latest Version for this Document

       Logic Sniffer ROM loader v0.3 (September 30, 2010)


Options

  • list of -flags and options 
parameters: 
  --port PORT  - port of Logic Sniffer, needs to be specified. Same as  -p Port 
  --speed SPEED  - sets speed of the serial port. Same as -s Speed
  --wH FILE - HEX file to be uploaded to OLS
  --wB FILE - BIN file to be uploaded to OLS
  --rH FILE - HEX file to be downloaded from OLS
  --rB FILE - BIN file to be downloaded from OLS
  --l X  or -l X   - send only first X paged 
commands:
  --erase  - erases Flash, also same as using -e 
  --write  - writes data to Flash, as  -w 
  --read   - reads data from Flash, same as -r 
  --ignore_jedec  - ignore jedec id, same as -i 
  --run    - enter run mode after finished, same as -r 
  --status - get OLS status, same as -s 
  --boot   - enter bootloader mode - ignore other commands, same as -b
  --selftest - run self-test - ignore other commands



  When no command specified, program will check FW version, and Flash ID

Usage examples

Notes on command parameters

This version supports the standard long and short option commandline parameters: the short option uses a single dash ('-') followed by a single character parameter, e.g -p while a long option uses double dash ('--') followed by single word or string e.g. --port the parameters 'wH', 'wR' uses only the long option parameter e.g. --wH filename

Windows

to Get help on parameters: 

  ols-loader
  ols-loader -h
  ols-loader --help
  
  ols-loader  error-in-cmdline-parameters

to read the ols.hex file, OLS on COM3: 

  ols-loader --port COM3 --rH OLS.hex --read  
     its the same as 
  ols-loader -p COM3 --rH OLS.hex -r

To erase and write flash, data in BIN file 'OLS.bin', OLS on COM2: 

  ols-loader --port COM2 --wB OLS.hex --write --erase
    or for the short options parameters:
  ols-loader -p COM2 --wB OLS.hex -w -e

To get status, and jump to run mode, OLS on COM2: 

  ols-loader --port COM2 --run --status
    or for the short option parameters:
  ols-loader -p COM2 -r -s

Jump to bootloader 

  ols-loader --boot    
  ols-loader -b

Run selftest (long commandline option parameter only) 

  ols-loader  --selftest

Linux

The ols-loader code compiles without complain on debian5 build.

Commands and syntax are same with windows except for the port option which uses the /dev/ttySx

To read Flash to HEX file 'OLS.hex' from OLS on /dev/ttyS1: 

  ./ols-loader --port /dev/ttyS1 --rH OLS.hex --read
  or
  ./ols-loader -p /dev/ttyS1 --rH OLS.hex -r

OSx

Not tested

Update Notes

This utility works similar in feature with the previous version (September 3, 2010) except that the commandline parameters was modified to follow the standard syntax.


1. the code now use the get_opt_long, which use the '--' (double dash) and also use the '-' (single dash) to specify command parameters. 2. the command line no longer use the colon ':' because of the use of get_opt_long function. eg. -port:com3 should now be --port com3 or -p com3 3. single dash use is always followed by single character, as opposed to double dash which use a string. 4. #define DPwrite write etc when not on _WIN32 os, instead of copy/pasting same functions as 'write' etc.


The code compile without complain in both debian and Windows, under code:blocks

Retrieved from "http://dangerousprototypes.com/docs/Logic_Sniffer:_OLS-loader_utility"