Logic Pirate Manufacturing Resources

From DP

Revision as of 08:39, 28 January 2013 by Markus gritsch (Talk | contribs)
Jump to: navigation , search

Contents

Download

Programming

  1. Start MPLAB IDE MPLAB IDE icon.png
  2. File->Import... select logic_pirate_combined_2013-01-25.hex from the downloaded ZIP file.
  3. Programmer->Select Programmer->PICkit 3
  4. Programmer->Settings...->Power select Power target circuit from PICkit 3
  5. Connect the programming adapter to the Logic Pirate
  6. Click the Program button MPLAB IDE program icon.png
  7. The LED must start shining after successful programming

Repeat steps 5. and 6. to program more boards.

Test Procedure

1. Connect the Logic Pirate to a USB port.

  • The LED on the board starts blinking
  • The Windows device manager shows a new COM port under Ports (COM & LPT) Logic sniffer device manager.png

2. Connect the test connector

3. Start the OLS host program

  • Click the button labeled as (1)
  • Select the COM port corresponding to the Logic Pirate (2)
  • Select Logic Pirate (40 MHz) (3)
  • Click Capture (4) Logic sniffer test settings.png
Retrieved from "http://dangerousprototypes.com/docs/Logic_Pirate_Manufacturing_Resources"