Logic Pirate Manufacturing Resources

From DP

Revision as of 15:03, 24 January 2013 by Markus gritsch (Talk | contribs)
Jump to: navigation , search

Contents

Programming

Test Procedure

1. Connect the Logic Pirate to a USB port.

  • The LED on the board starts blinking
  • The Windows device manager shows a new COM port under Ports (COM & LPT) Logic sniffer device manager.png

2. Connect the test connector

3. Start the OLS host program

  • Click the button labeled as (1)
  • Select the COM port corresponding to the Logic Pirate (2)
  • Select Logic Pirate (40 MHz) (3)
  • Click Capture (4) Logic sniffer test settings.png
Retrieved from "http://dangerousprototypes.com/docs/Logic_Pirate_Manufacturing_Resources"