FT2232 breakout board manufacturing resources
From DP
Contents |
Self test
- Download and install the FTDI VCP driver, if needed
- Connect ADBUS0 and ADBUS1 on the FT2232 breakout board
- Plug in the breakout board
- Find the first COM port for the FT2232 in the Windows Device Manager
- Run the self-test, verify success and LEDs when prompted
Success
--------------------- Starting a new Self Test---------------------
Connect ADBUS1 and ADBUS0 for the self-test
Opening COM12 at 115200bps...
Starting self-test...
Self test PASSED!!! RX, TX and POWER LEDs should be ON
Press any key to continue...
Connect another and press any key to start the self-test again
Or hit ESC key to stop and end the test.
Fail
Source
This application was compiled for Windows with CODE BLOCKS 10.1 and MinGW.
- [SVN]