CoolRunner-II CPLD breakout board
|CoolRunner-II CPLD breakout board|
Ever get stuck choosing the right logic chip combination or voltage level translator? Give up the hunt and create your own custom logic chip. CPLDs can give you the logic you need, with the pinout you want, while saving board space and board revisions.
The CoolRunner-II XC2C CPLD has two separate banks of pins that can operate at different voltages, internal pull-up resistors, and pin keepers. This development board from Dangerous Prototypes will help you build your first custom logic chip using simple schematic entry, Verilog, or VHDL.
- XC2C64A CPLD with 64 macrocells
- On-board 1.8volt supply for the core
- On-board 3.3volt supply for pins
- Separate pin banks can be operated at different voltages (1.2volt to 3.3volt)
- Selectable 1.8volt, 3.3volt, and external supply for each pin bank
- LEDs for output
- Push button for input
- Populated JTAG header
- Easy to program with the Bus Pirate and Bus Blaster
- Open source (CC-BY-SA)
The XC2C64A (U1) is a 64 macrocell CPLD with two separate IO banks for voltage translation. It is one of the smallest CPLDs made by Xilinx, and is readily available from Digikey for around $2.65.
The CPLD core requires a 1.8volt supply to each VINT pin. This supply is provided by an on-board 1.8volt regulator.
The IO pins are divided into two banks that each operate from a separate supply of 1.2volts to 3.3volts. An external supply can be connected to either IO pin, or place a jumper on the V1 and V2 pins to select the on-board 1.8volt or 3.3volt power supply.
Each supply pin has a 0.1uF capacitor (C1,C2,C3,C4).
The JTAG programming pins are brought to header JT. The JTAG interface is powered by the 3.3volt core supply.
- For more see the Xilinx CoolRunner-II CPLD quick start
Buttons and LEDs
|GND||Ground connection||Ground connection||GND|
|V+||Supply voltage (max 5volts)||3.3volt output (max 100mA)||3V3|
|V2||Bank 2 IO external supply (1.2-3.3volts)||1.8volt output (max 50mA)||1V8|
|18||Push button||Bank 1 IO external supply||V1|
|38||LED D2||LED D1||39|
|D1, D2, PWR||3||Yellow LED||LED-805|
|JTAG||1||0.1” Pin header||1X06|
|PB||1||SMD button, small||TACT_SWITCH_SMALL|
|U2||1||1.8volt LDO voltage regulator 100mA||SOT-23-5|
|U3||1||3.3volt LDO voltage regulator 150mA||SOT-23-5|
|V1,V2||2||0.1” Pin header||1X03|
Q1 on the bottom of the PCB is for an optional 3.3volt oscillator. It feeds into a global clock pin. Some suitable values are:
Development and programming tutorials are on the main CPLD page.
You can [get one for $00], including worldwide shipping.
Your purchases at Seeed Studio keep the open source project coming, we sincerely appreciate your support!
- CPLD breakout homepage Programming, tutorials, devices, and more
- CoolRunner-II CPLD quick start
- CoolRunner-II family manual
- XC2C64A device datasheet
- XC2C32A device datasheet (smaller version of XC2C64A used on Bus Blaster v2)