Bus Pirate Edu Kit Exercise no.9

From DP

Revision as of 12:46, 11 April 2013 by Arakis (Talk | contribs)
Jump to: navigation , search

Contents

Overview

BP EK E9 overview.jpg

The Circuit

BP EK E9 schematic.jpgBP EK E9 circuit.jpg

Breadboard legend

IC Location Breadboard wiring legend
IC PIN1 (+) PIN2 (-)
25LC040A E14 E15
Signal name Contact1 Contact2
5V BP_5V BB_+_left
5V BB_+_left BB_+_right
5V BB_+_left A16
5V BB_+_right J14
5V BB_+_right J15
GND BP_GND BB_-_left
GND BB_-_left A17
MOSI BP_MOSI J17
MISO BP_MISO A15
CLK BP_CLK J16
CS BP_CS A14
  • The (+) and (-) next to PIN1 and PIN2 are intended for devices such as LEDs, where PIN1 should be the anode and connected to a higher potential then PIN2.

Bus Pirate Terminal

Not Working?

Taking it further