MCP2200 breakout board manufacturing resources

From DP

Jump to: navigation , search

Contents

Self test

  1. Download and install the MCP2200 driver, if needed
  2. Connect RXD and TXD on the breakout board
  3. Plug in the breakout board
  4. Find the COM port for the MCP2200 in the Windows Device Manager
  5. Run the self-test, verify success and LEDs when prompted

Options

--
MCP2200 TEST utility v0.1 (CC-0)
http://dangerousprototypes.com
--
Usage:
MCP2200selftest -d device [-s speed]
Example Usage: MCP2200selftest COM1
Where: -d device is port e.g. COM1
-s Speed is port Speed default is 115200
--

Help screen.

c:\>MCP2200selftest -d COM12

Example command line use.

Success

Press Esc to exit, any other key to start the self-test
Connect TXD and RXD for the self-test
Starting test!
Opening COM3 at 115200bps...
Starting self-test...
Self test PASSED!!! RX (D1) and TX (D2) LEDs should be ON
Press any key to continue...

Fail

-Starting a new Self Test-
Connect TXD and RXD for the self-test
Opening COM3 at 115200bps...
Starting self-test...
Error: bad reply (54), failed self test
Press any key to continue...

Source

This application was compiled for Windows with CODE BLOCKS 10.1 and MinGW.