Categories

10MHz distribution amplifier

Posted on Thursday, March 15th, 2018 in DIY, PCBs by DP

p-10mhz_pcb_top-600

G4FRE built a 10MHz distribution amplifier:

I have had a need for a distribution amplifier for a while now. Searching around I found the design by G4JNT in Radcom, which filled my needs. I redrew the circuit for 4 outputs and had PCBs made. (if you want one contact me!)  I now have the units in my M1DST 10MHz Thunderbolt monitoring project and in my LPRO101 10MHz Rubidium source.

See the full post on his blog here.

This entry was posted on Thursday, March 15th, 2018 at 10:10 pm and is filed under DIY, PCBs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “10MHz distribution amplifier”

  1. Jon Jackson says:

    I would be interested in 1 or 2 of your circuit boards.

    Jon

  2. Drone says:

    The LM7171 used in this very simple design can be simulated in LTspice with reasonable results at 10MHz using the non-encrypted PSPICE model from TI (download it from the LM7171 TI homepage and use the LTspice bult-in opamp2.asy symbol). Also look at the LMH6703 part; lower drive current but higher GBW and more. The LMH6703 non-encrypted PSPICE model from TI also works in LTspice but it requires more work to get the symbol to function.

Leave a Reply to Jon Jackson

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please