Categories

App note: USB Type C, CC Pin design considerations, high voltage design considerations for Type-C connector pins in systems supporting non-USB standard charging protocol and/or fault cases

Posted on Sunday, July 2nd, 2017 in app notes by DP

an_fairchild_AN-5086

Another app note from Fairchild Semiconductors on USB Type C to USB legacy design considerations. Link here (PDF)

When designing hardware systems with type C connectors, a designer also has to consider all legacy, standard, and nonstandard specifications that exist in the USB connector eco system. With the introduction of the Type C connector and the Configuration channel (CC Pin) new challenges occur trying to ensure overall system robustness. This note addresses some of the concerns with the CC pin in a robust system environment.

This entry was posted on Sunday, July 2nd, 2017 at 5:00 pm and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: So Romanians use old ICs too, a bit reminiscent of Dilshan's projects. I'm vaguely disappointed by the liberal use of float data and float calculations....
  • Max: This is of course no "0-30V" supply - the single-supply standard LM723 schematic can't go all the way down to zero, which is why I...
  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • Olav Storstrøm: Please add 9-pin D-sub RJ45 and RJ12 connectors! Thanks!
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...