Categories

Beacon Keyer

Posted on Thursday, April 27th, 2017 in DIY, PIC by DP

pics-20161224_BeaconKeyer_RevB_004-600

Lukas Fässler from Soldernerd published a project writeup showing how he built a PIC-based beacon keyer:

This is likely the first ham radio related project that I document here on this blog
But my very first PIC project was a beacon keyer that I made for my father, HB9BBD. That was in 2013. A beacon keyer is a great project to get started with microcontrollers since it’s not much more than a fancy way of blinking an LED.

Project info at Soldernerd homepage and the GitHub repository here.

This entry was posted on Thursday, April 27th, 2017 at 3:32 pm and is filed under DIY, PIC. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Beacon Keyer”

  1. Ja says:

    What the keyer do? Sends random morse code or there is some input? If someone can point me to some source to read I would be helpfull. :)

Leave a Reply to Ja

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!