Bus Pirate v3.8 free PCB build

Posted on Monday, April 6th, 2015 in builds by DP

IMG_4203 copy

kubatyszko writes, “Finally got the PCB’s and built both of them, it was a great exercise in soldering, and eye test too, especially the SMT 0603 components.”

If you build a free PCB we’ll send you another one! Blog about it, post a picture on Flicker, whatever – we’ll send you a coupon code for the free PCB drawer.

Get your own handy Bus Pirate for $30, including world-wide shipping. Also available from our friendly distributors.

Via the forum.


This entry was posted on Monday, April 6th, 2015 at 4:13 pm and is filed under builds. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

4 Responses to “Bus Pirate v3.8 free PCB build”

  1. Paul Scott says:

    Nice! I’m waiting for mine to arrive, will post some examples of bad soldering as soon as I can! :)

  2. Ross Potts says:


    I had won a second coupon and was going to save it for when other boards became available. Now I’m thinking I should just get the second BP and compare hand soldering to my (hopefully) soon to be finished reflow oven.

  3. Harish says:

    My BP pcb yet to arrive

  4. Ross Potts says:

    Its okay. It takes a while to come in.

Leave a Reply to Ross Potts

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Edward Mallon: I've been oversampling those thermistors with the ADC and some pin-toggle noise for a while now, and that method is good. But lately I've been...
  • Marko: armature -> amateur
  • Crawford: Dibs,
  • bill: a sunny Sunday here
  • Iain NoSpam: A very random comment from a very random commenter