Categories

Bus Pirate v3.8 free PCB build

Posted on Tuesday, February 3rd, 2015 in builds by DP

20150126_183420_s

xStouf built a free Bus Pirate v3.8 PCB.  The Bus Pirate is an open source hacker multi-tool that talks to electronic stuff.

If you build a free PCB we’ll send you another one! Blog about it, post a picture on Flicker, whatever – we’ll send you a coupon code for the free PCB drawer.

Get your own handy Bus Pirate for $30, including world-wide shipping. Also available from our friendly distributors.

This entry was posted on Tuesday, February 3rd, 2015 at 2:11 pm and is filed under builds. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

4 Responses to “Bus Pirate v3.8 free PCB build”

  1. fastlink30 says:

    Can be nice if i can build one

  2. Jure says:

    Would really like to build one, not buy it…

    • Sleepwalker3 says:

      Well then enter the free PCB here on the blog each Sunday and you might be able to get one. You can also enter via Facebook on a Friday or Twitter on a Tuesday.

  3. Texpier says:

    I want to make good PCB, I have a ARM mega2560, but the deal is: I built the PCB whit ink right, you now conductive ink, but the mega2560 is surface, the ink and thar kind of pcb works well with ink?

Leave a Reply to fastlink30

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please