Categories

Arduino Library for Freescale’s MMA7361 3 axis accelerometer

Posted on Friday, November 14th, 2014 in Arduino, library by DP

15071754173_00038d914a

Rohit Gupta wrote a basic library for using MMA7361 3axis Accelerometer with Arduino, that is available at Github:

This library helps you to easily play with the almost universal 3 axis accelerometer available in most Hobby markets that is based on Freescale’s MMA7361.
In order to get in working you have to pull-up the sleep pin using a 10K resistor to the 3.3V pin. All other connections are labelled.

Via the contact form.

This entry was posted on Friday, November 14th, 2014 at 10:10 pm and is filed under Arduino, library. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Arduino Library for Freescale’s MMA7361 3 axis accelerometer”

  1. Hi, I am trying to use this library. I works great with one accelerometer, but the second keeps gets the same output.

Leave a Reply to Mario Badilla

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please