Categories

Vintage multimeter – Weston 6000

Posted on Thursday, February 27th, 2014 in Teardowns by DP

01-IMG_20140208_150017

Teardown and repair of a Vintage multimeter – Weston 6000 by KuzyaTech:

Another addition to my growing collection of vintage multimeters is this Weston Schlumberger Model 6000 meter from the mid 1970s
The meter was listed as in almost like new condition except for a spot on the front panel. It came with (very rubbery) test leads and an actual printed user manual- a rare thing these days.The Ebay posting was worded very carefully to never mention whether the thing actually works, so I figured it did not really matter. If it does not- teardown turns into repair attempt and either way we learn something new.

This entry was posted on Thursday, February 27th, 2014 at 1:00 pm and is filed under Teardowns. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

4 Responses to “Vintage multimeter – Weston 6000”

  1. Kevin says:

    From the article:
    ” Over time the un-vented sensor would measure up to .400 deg C away from the other two.”

    On my screen the “.400” wrapped onto a new line, and the first time I read it as “400 deg C”. Please write “0.400”, “400 mK”, “four tenths”, or “400e-3”,….

  2. Destate9 says:

    Holy hand-drawn-traces, batman!

    • langwadt says:

      Probably done with tape, you use to get black tape (crepe kinda like painters masking tape) in all the different trace widths and pad size. Layout done by hand on clear plastic (sometimes in 2x size) and photo onto the PCB

Leave a Reply to langwadt

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please