Free PCB Sunday: Pick your PCB

Posted on Sunday, January 26th, 2014 in Free PCBs by DP


We go through a lot of prototype PCBs, and end up with lots of extras that we’ll never use. Every Sunday we give away a few PCBs from one of our past or future projects, or a related prototype. Our PCBs are made through Seeed Studio’s Fusion board service. This week two random commenters will get a coupon code for the free PCB drawer tomorrow morning. Pick your own PCB. You get unlimited free PCBs now – finish one and we’ll send you another! Don’t forget there’s free PCBs three times every week:

Some stuff:

  • Yes, we’ll mail it anywhere in the world!
  • Be sure to use a real e-mail in the address field so we can contact you with the coupon.
  • Limit one PCB per address per month please.
  • Like everything else on this site, PCBs are offered without warranty.
  • PCBs are scrap and have no value, due to limited supply it is not possible to replace a board lost in the post

Be the first to comment, subscribe to the RSS feed.

This entry was posted on Sunday, January 26th, 2014 at 5:05 pm and is filed under Free PCBs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

109 Responses to “Free PCB Sunday: Pick your PCB”

  1. pspgeek says:


  2. Tobias Einarsson says:

    Me me me! I need those bus pirate cables!

  3. Steve M says:

    Here’s a lucky lucky comment!

  4. Richard says:

    I’m in!

  5. Wade says:

    Dig those free PCBs!

  6. teme says:

    Pick me me

  7. Alberto antonini says:


  8. Kemp says:

    This comment is a little longer than all the others, but it doesn’t really say anything more than “I hope I get picked” ;)

  9. Dr. Obscure says:

    Izzy wants a project too.. we need a coupon…

  10. vmax says:

    Hope this tym i got one….!!!

  11. Jens says:

    Yes, please. Will be wonderful if you chose me ♡.

  12. Bruce says:

    yes please

  13. Lars Böhm says:

    maybe this time…

  14. Steve says:

    free PCB ftw!

  15. Oliver LC says:

    I could always do with practising my soldering…

  16. Deadlock says:


  17. Matthew Huck says:

    Maybe since it is my birthday I will get lucky, so here I go.

  18. benjamin says:

    Why not me?

  19. Adriano says:


    Just finished my reflow oven. Could use a PCB.

  20. David Bengtson says:

    Pick Me, Pick Me!!!

  21. SaakNeMah says:


  22. robsut says:

    I wish

  23. Xykon says:

    With the drawer slowly getting things back in stock I’m back to participating.

  24. Steve says:

    Me please.

  25. Tony Cekolin says:

    I’d love to get a pcb!

  26. Kenny says:

    time to try again

  27. Luigi Salfi says:

    Apples are green

  28. Lee says:

    I’d love to win a free PCB

  29. Efcis says:

    Any luck today ?

  30. fidel salinas says:

    pirate cables to go with the pirate PCB v3.8 thats coming in. :)

  31. Behzat says:

    letsy try again ;). thanks in advance

  32. gontran sion says:

    yeahhhhh :D
    i want to play :D

  33. Marcello says:

    Free PCB is a dream???

  34. Jdownj says:


  35. Tom P. says:


  36. Michael says:

    // comment

  37. Dan Ringer says:

    Gonna make v3.8!

  38. Blars says:

    Another sunday, another try.

  39. Rob says:

    would like a pcb to build.

  40. Justin Myers says:

    I’d be interested in one!

  41. Mike Hansen says:

    Pick me! :)

  42. Aron says:

    free pcb

  43. Alexandre Mello says:

    I’m in !!!

  44. WallaceIT says:

    random!! :)

  45. Brett says:


  46. Ostamo says:

    Man I would love a coupon

  47. Rui Santos says:

    Random comment from

  48. Eyeball Kirkenbach says:


  49. Wolfi says:


  50. cornbread ninja says:

    Yes please!

  51. Jeanmarc78 says:

    Hello Thanks for having refilled the free pcb drawer
    May be a new coupon this sunday

  52. Bruce James says:

    I’d love a free PCB please. Cheers.

  53. Chris Wiltshire says:

    Yes Please!

  54. cody says:

    PCBs are the bee’s knees

  55. Buspirate says:

    Yes, please!

  56. insurgent says:


  57. Theo says:

    Happy Australia Day to the Aussies out there in the wide wide world

  58. McMonster says:

    Me please.

  59. Matt says:

    Me me me

  60. Steve says:

    Free PCB please

  61. emmanuel valentin says:

    me please

  62. Bob says:

    Free PCB for me!

  63. Broti says:

    once again?

  64. Thomas says:

    Pick me!

  65. Chris says:


  66. Peter says:

    Would be nice to be picked.

  67. rich says:

    yes please

  68. FourthDr says:

    Better late than never!

  69. Deano Calver says:

    Yay Its sunday, just…

  70. Kelvin says:

    Trying my luck again:)

  71. devgiant says:

    Another Sunday, another try :)

  72. Matt says:

    Free is nice :-)

  73. JS says:

    pick me! pick me!

  74. Gordon Margulieux says:

    Thank you for the chance to win

  75. Jim P says:

    Another Sunday, another try….

  76. Collin says:

    pick me

  77. Cruz says:

    Free is always cool!

  78. Arthur says:

    another try

  79. Hector says:

    Ladedadedaaa pcb please

  80. scrpy says:

    My soldering iron is cold & lonely, warm my soldering irons heart with a free PCB!

  81. Brent Bolen says:

    I’ll take that one.

  82. Steve says:

    I’ll take one. Thanks!

  83. Kai says:

    Should try souch a lottery myself…

  84. Cruz says:

    Cool, Free Stuff!

  85. OneShot Willie says:

    Oooh! Pick me! I’m a dangerous prototype too! : )

  86. Per says:

    Trying again and again

  87. xtl says:

    TOTD: frequency conversion

  88. Greg Fenton says:

    Hope I am not too late!

  89. jedhodson says:

    First try at this. Or am I too late.

  90. Mol-1 says:

    Trying again and again and again …

Leave a Reply to Jolan

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please