Categories

Bus Pirate reference card

Posted on Friday, November 15th, 2013 in Bus Pirate, pin reference by DP

bus-pirate-card

jrychter shared this Bus Pirate reference card he made in the forum:

The Bus Pirate from Dangerous Prototypes is a really useful tool. I use it regularly to bring up and test new I2C devices, or as a cheap protocol analyzer for I2C and SPI.
Unfortunately, the supplied cables aren’t clearly labeled (only color-coded), and I found the reference cards available on the net lacking: they were usually not clearly readable and didn’t help much. So I created my own.

Thanks for the tip!

See also ecronin’s case sticker, and the new pin reference card category. We’ll keep openly-licensed reference cards in the documents folder of the SVN, feel free to contribute yours.

This entry was posted on Friday, November 15th, 2013 at 9:00 pm and is filed under Bus Pirate, pin reference. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Bus Pirate reference card”

  1. Sleepwalker3 says:

    Nice, I’ll have to print one up. Credit card size format would be nice.

Leave a Reply to Sleepwalker3

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...