Categories

Open source DIY cellphone

Posted on Wednesday, August 14th, 2013 in Arduino, DIY by DP

8575437814_4cbd9d0284_z

Here is a DIY cellphone based on the Arduino platform and the GSM shield. It features basic functionality of a cellphone including making calls, sending SMS, storing phone numbers and displaying the current time.

The DIY Cellphone is a working (albeit basic) cellphone that you can make yourself. It can make and receive phone calls and text messages, store names and phone numbers, and display the time. It builds on the hardware and software in the Arduino GSM Shield but extends it with a full interface, including display, buttons, speaker, microphone, etc.

Via the Electronics Lab.

This entry was posted on Wednesday, August 14th, 2013 at 7:00 pm and is filed under Arduino, DIY. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

9 Responses to “Open source DIY cellphone”

  1. jaromir says:

    Everybody should do his/her own mobile phone one day, I already did: https://picasaweb.google.com/111890741167251011072/HomemadeGSMPhoneTest1

  2. Andrew Frazer says:

    Cool, opensource is about 20 years behind Samsung.

  3. 8N1 says:

    very cool. the ability to make a phone for a grandparent that does nothing more than make and receive calls and has no other functionality whatsoever is priceless….

    • Bertho says:

      My mom always drives salesmen insane by asking “do you have something with only one button”. Indeed, often just on/off is enough. In this case, add 10 digits and I’ll take it ;-)

  4. John U says:

    Err, this is not an Open Source Cellphone, this is an Open Source controller to a closed-source cellphone module.

    There is, I believe, an Open GSM stack out there, and I would dearly love to see someone implement an entirely open phone (especially because, y’know, Prism and all that…) but this is not that.

    • bolke says:

      What use is an open phone that uses a goverment controlled network?

      • Drone says:

        @bolke, Perhaps an open cell phone can be used with the likes of Open-infrastructure outside the “Government” controlled network”? Google “OpenBTS” for a start, then move on to the likes of Asterisk etc. soft-switch stuff. Maybe OpenBTS in conjunction with evolving low-cost SDR options will come to light (if not already). But then again, the Government typically controls the RF spectrum. But Governments have been known to fall. It’s good to have a back-up option, just in my opinion.

Leave a Reply to 8N1

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please