Categories

Bitbang USB v1.1 on a MSP430

Posted on Friday, December 14th, 2012 in MSP430, USB by DP

MSP-EXP30G2

M-atthias was successful in running bitbang USB v1.1 on a MSP430G2452. It’s similar to the V-USB project that’s used on AVRs. It takes ~2kb of room on the microcontroller.

Yes, this is similar to the efforts of V-USB for AVR, but in a very early stage. I am in contact with Christian Starkjohann who wrote V-USB, and he helped me with valuable comments. Thank you !

Via 43oh.

This entry was posted on Friday, December 14th, 2012 at 11:00 am and is filed under MSP430, USB. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “Bitbang USB v1.1 on a MSP430”

  1. Tony Kao says:

    I don’t think you meant “ruining” USB 1.1, although that may be unintentionally ironic given how some people feel about bit-banged USB ;)

Leave a Reply to Tony Kao

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...