Categories

MSP430 board guest PCBs

Posted on Thursday, November 29th, 2012 in MSP430, PCBs by DP

Boseji from m8051 gave us these PCBs on the second day of the Bangalore geek tour. We added them to our free PCB drawer.

The QFP package MSP430F5310 is a nice MSP430 chip that can be programmed and debugged using the MSP430 launchpad. They are presently under CC-BY-SA so you can go ahead if you ever need modifications.

Specifically for the Low Cost MSP430G Series – DIP/SMD. They are presently under CC-BY-SA so you can go ahead if you ever need modifications.

This entry was posted on Thursday, November 29th, 2012 at 11:00 am and is filed under MSP430, PCBs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

4 Responses to “MSP430 board guest PCBs”

  1. Hendrik Lipka says:

    The images are reversed between the two board (the OFN entry in the PCB drawer shows the DIP board).

  2. ken says:

    What’s “CC-BY-SA”? What where are the schematics for the boards so you know what to put where?

  3. boseji says:

    Hello,

    The board on the Right hand side is the combination of 4 boards:
    The partial schematics of the MSP430F5310 are located here:
    https://github.com/boseji/MSP430-LaunchPad-Innovation/tree/master/hardware/5310breakout

    And this is the article featuring this board:
    http://m8051.blogspot.in/2011/11/msp430f5310-breakout.html

    The other parts includes a GPS module breakout, MMA8453Q accelerometer breakout and TPS780330220 breakout.

    The Board on the Left hand side is a GP board for MSP430G Series microcontroller.
    Both having compatible DIP and SSOP breakouts with som GP area for prototyping,
    On the back side of each you have a tiny TPS780330220 regulator circuit in case you need to power using higher voltages.

    Hope that this is helpful.

    Warm Regards,
    Boseji

  4. Hendrik Lipka says:

    CC-BY-SA: Creative Commons Attribution-ShareAlike license (see http://creativecommons.org/licenses/by-sa/3.0/ )

    The files for the 5310 board are here: https://github.com/boseji/MSP430-LaunchPad-Innovation/tree/master/hardware/5310breakout

Leave a Reply to Hendrik Lipka

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...