Categories

EJTAGproxy: Use your PicKIT2 or PicKIT3 to connect PIC32s to the GNU Debugger

Posted on Monday, July 23rd, 2012 in hacks, open source by DP

SergeV let us know about EJTAGproxy, a command line utility, that lets your PicKIT2 or PicKit3 act as a JTAG debugger for PIC32 MCUs.

It’s a command-line utility, which connects GDB to ICSP port of pic32 via pickit2 or pickit3 scripting edition. A standard GDB remote serial protocol is implemented. It also can be used with Eclipse, DDD, Insight or other compatible debuggers. All families of pic32 are supported, including mx1/mx2. The utility works on Linux, Windows and Mac OS X. Sources are available under BSD license.
It also supports debugging via JTAG port with Olimex JTAG USB-Tiny adapter.
Any feedback appreciated.

Via the forum.

This entry was posted on Monday, July 23rd, 2012 at 11:00 am and is filed under hacks, open source. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

4 Responses to “EJTAGproxy: Use your PicKIT2 or PicKIT3 to connect PIC32s to the GNU Debugger”

  1. Jon Jackson says:

    Link to EJATAGproxy above is dead. Could you please make it undead?

  2. JATAG says:

    It’s more likely “JTAG” than “JATAG”?

Leave a Reply to JATAG

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Edward Mallon: A teacher friend asked us for faster build that was less dependent on soldering because they didn't have the budget for that kit. So we've...
  • lostengineer: hahaha an entire article just saying to heat-shrink your wires or glue them if they might move around a lot. When did common sense die?
  • readybrek: They're tasty tasty very very tasty... they're very tasty.
  • hli: Sunday++
  • Chamod: Check on your buddy. Make sure they don't forget their lunchbox.