Fixing cheap female pinheaders

Posted on Thursday, July 19th, 2012 in hacks by DP

Lindsay lets us know about a problem he ran into with cheap female pinheaders:

I once had problems with a 0.1″ pin header connector – the sockets inside the female connector made extremely poor contact. It was for an LCD display and only about half of the pins were connected! Swapped it for a different style of connector and it worked fine.

Via the comments.

This entry was posted on Thursday, July 19th, 2012 at 11:00 am and is filed under hacks. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

4 Responses to “Fixing cheap female pinheaders”

  1. dieter says:

    picture on his website and in cv tells me that “she” is not she :)

  2. Mats says:

    I would have guessed that the tuning fork-variant was the inferior version. They don’t connect reliably with those Chinese breadboard jumper wires.

    • Yes, I initially thought that as well – surely four points of contact would be better than two. But half of the four points of contact weren’t actually making contact ;-)

      In addition, the plastic housing of the “tuning fork” connector is much better – seems to be glass-filled nylon, whereas the cheapo one is an unfilled polythene. Yeah, hardly a big deal, but it just feels more solid. The legs don’t get bent as easily either.

Leave a Reply to Filip

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Edward Mallon: I've been oversampling those thermistors with the ADC and some pin-toggle noise for a while now, and that method is good. But lately I've been...
  • Marko: armature -> amateur
  • Crawford: Dibs,
  • bill: a sunny Sunday here
  • Iain NoSpam: A very random comment from a very random commenter