Categories

Bus Pirate v4 back in stock

Posted on Monday, May 21st, 2012 in BP v4, Bus Pirate by DP

Bus Pirate v4 is back in stock at Seeed Studio. The Bus Pirate is an open source hacker multi-tool that talks to electronic stuff. It’s got a bunch of features an intrepid hacker might need to prototype their next project.

v4 has some great new features, but if you want a tool that “just works” the v3 is still your best bet.

You can get a Bus Pirate v4 for $40, including worldwide shipping.

This entry was posted on Monday, May 21st, 2012 at 11:00 pm and is filed under BP v4, Bus Pirate. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “Bus Pirate v4 back in stock”

  1. chipres says:

    Clicking seeedstudio goes bpv3

  2. Filip says:

    thanks, link fixed..

Leave a Reply to chipres

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please