Categories

VIDEO #17: Seeed Studio open source hardware manufacturing tour in Shenzhen, China 2012

Posted on Wednesday, April 18th, 2012 in Global Geek, people, Videos by DP

We toured the offices and factory where Seeed Studio makes open source hardware in Shenzhen, China. All our open source projects are manufactured and shipped from here.

Be sure to check out our visit to the Shenhzen Maker Faire, as well as our Global Geek Tour wiki.

This entry was posted on Wednesday, April 18th, 2012 at 12:00 pm and is filed under Global Geek, people, Videos. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

8 Responses to “VIDEO #17: Seeed Studio open source hardware manufacturing tour in Shenzhen, China 2012”

  1. Zeta says:

    Nice. Always wanted to see how these guys make the stuff.

  2. GinPB says:

    only 1.47 minutes?

  3. tayken says:

    Hey, I know Nana! She helped me with sourcing some parts!

  4. Roger Williams says:

    Wow. Nice to put some faces to the company. Such a small outfit, amazing products and quality comes out of there.
    Thanks!

  5. TitanMKD says:

    Thanks for the video, very interesting.

  6. Hardcorefs says:

    Lets not even mention there appears to be a complete lack of anti-static wrist bands……..

Leave a Reply to Zeta

Click here to cancel reply.

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please